IEC 62031-2008 普通照明用发光二极管(LED)模块.安全规范

标准号：IEC 62031-2008
中文标准名称：普通照明用发光二*管(LED)模块.安全规范
英文标准名称：LED modules for general lighting - Safety specifications
标准类型：K71
发布日期：1999/12/31 12:00:00
实施日期：1999/12/31 12:00:00
中国标准分类号：K71
国际标准分类号：29.140.99
引用标准：IEC 60598-1-2003;IEC 602598-1/A1-2006;IEC 60338-2-2;IEC 61347-1-2007;IEC 61347-2-13-2006;IEC 62471-2006;ISO 4046-4-2002
适用范围：This International Standard specifies general and safety requirements for light-emitting diode(LED) modules:٭ LED modules without integral control gear for operation under constant voltage, constantcurrent or constant power;٭ self-ballasted LED modules for use on d.c. supplies up to 250 V or a.c. supplies up to1 000 V at 50 Hz or 60 Hz.NOTE 1 The safety requirements for separate control gear are specified in IEC 61347-2-13. The performancerequirements for separate control gear are specified in IEC 62384.NOTE 2 Requirements for LED modules with integrated control gear and equipped with a lamp cap (self-ballastedlamp), intended for mains voltage general lighting service retrofit applications (thereby replacing existing lampswith identical lamp caps) are specified in IEC 60968 (an amendment to the present edition or a new edition withextended scope is in preparation).Requirements for LED modules with integrated control gear and equipped with a lamp cap (self-ballasted lamp),intended for non-mains voltage general lighting service retrofit applications (thereby replacing existing lamps withidentical lamp caps) are under consideration.NOTE 3 Where in the requirements of this standard both types of LED modules, with and without integral controlgear, are addressed, the word “modules” is used instead. Where only the expression “LED module(s)” is used, it isunderstood to refer to the type without integral control gear.