DIN EN 15274-2008 结构组件用一般用途粘合剂.要求和试验方法

标准号：DIN EN 15274-2008
中文标准名称：结构组件用一般用途粘合剂.要求和试验方法
英文标准名称：General purpose adhesives for structural assembly - Requirements and test methods; English version of DIN EN 15274:2008-01
标准类型：G39
发布日期：1999/12/31 12:00:00
实施日期：1999/12/31 12:00:00
中国标准分类号：G39
国际标准分类号：83.180
引用标准：EN 923-2005;EN 1067;EN 1242;EN 1465;EN 1504-8;EN 1877-1;EN 1877-2;EN 12092;EN 13999-1;EN 13999-2;EN 13999-3;EN 13999-4;EN 14022;EN 15336;EN ISO 75-3;EN ISO 527-2;EN ISO 527-3;EN ISO 9142;EN ISO 9664;EN ISO 11339;EN ISO 11909;EN ISO 14896;EN ISO 15605
适用范围：This European Standard specifies requirements for adhesives intended for use in the creation and generalassembly of Icad-bearing, structural elements used in civil engineering works and the construction of buildings.Other than the exceptions stated, it embraces all combinations of bonded materials, used to create or repairIcad-bearing elements.It covers individual adhesives and special purpose kits comprising various combinations of adhesive typesand components.It includes test methods and methods of assessment.The performance requirements in this standard may not be applicable to highly specialised applications inextreme environmental conditions, e.g. cryogenic use, nor do they cover specialised circumstances such asaccidental impact, e.g. due to traffic or ice, or earthquake loading where specific performance requirementswill apply.The intended use is for internal and external construction elements and those cladding and covering elements(excluding ceramic tiles) specifically required, by regulatory authorities, to provide protection from fire inidentified building zones, including escape routes.It does not cover: Prefabricated, bonded structural components. Concrete bonded either to itself or steel or a material based on carbon fibre. Wood, when bonded to itself to form a timber based, laminated beam [of the type known as a 'Glulam' beam] intended for use as a major structural, Icad bearing element. Thermoplastics [e.g. polyethylene, polypropylene, polyamide and fluorinated polymers in general] unless they have been specifically prepared [usually through a specialised oxidative process] for bonded assembly on site. Co-axial metallic assemblies comprising fasteners- threaded and otherwise, pipes and tubes. Glass assemblies in structural glazing applications made using silicone adhesives. Those structural elements that are permanently immersed in water.