ISO 15181-3-2007 涂料和清漆.防虫涂料中杀虫剂释放速率的测定.第3部分:通过测定萃取物中乙烯硫脲浓度计算乙烯基双二硫代氨基甲酸锌(代森锌)的释放率

标准号：ISO 15181-3-2007
中文标准名称：涂料和清漆.防虫涂料中杀虫剂释放速率的测定.第3部分:通过测定萃取物中乙烯硫脲浓度计算乙烯基双二硫代氨基甲酸锌(代森锌)的释放率
英文标准名称：Paints and varnishes - Determination of release rate of biocides from antifouling paints - Part 3: Calculation of the zinc ethylene-bis(dithiocarbamate) (zineb) release rate by determination of the concentration of ethylenethiourea in the extract
标准类型：G51
发布日期：1999/12/31 12:00:00
实施日期：1999/12/31 12:00:00
中国标准分类号：G51
国际标准分类号：87.040
适用范围：This part of ISO 15181 specifies the apparatus and analytical method for determining the amount of zineb thathas been released from an antifouling paint into artificial seawater in accordance with the procedure given inISO 15181-1.Zineb is released from antifouling paints in the form of ionic ethylene-bis(dithiocarbamate) which is unstable inthe marine environment. This part of ISO 15181 describes a method for converting the released species into astable degradation product, ethylenethiourea, and determining its concentration in the treated artificialseawater samples, and gives the final calculation for the release rate of zineb under the specified laboratoryconditions.This part of ISO 15181 is designed to generally allow the concurrent determination of zineb and other biocidesthat can be released by a given antifouling paint (for example, copper) through the analysis of separatesub-samples of an artificial seawater extract generated in accordance with the procedure given inISO 15181-1.When used in conjunction with ISO 15181-1, the practical limits on the quantitative measurement of releaserates by this method are from 2,9 μg⋅cm–2⋅d–1 to 500 μg⋅cm–2⋅d–1. The quantitative measurement of releaserates below this range will require the use of an analytical method with a lower limit of quantitation forethylenethiourea in artificial seawater than the limit specified in 5.1.