ISO 22902-7-2006 道路车辆.车用多媒体接口.第7部分:物理规范

标准号：ISO 22902-7-2006
中文标准名称：道路车辆.车用多媒体接口.第7部分:物理规范
英文标准名称：Road vehicles - Automotive multimedia interface - Part 7: Physical specification
标准类型：T07
发布日期：1999/12/31 12:00:00
实施日期：1999/12/31 12:00:00
中国标准分类号：T07
国际标准分类号：43.040.15
适用范围：The scope of this part of ISO 22902 is limited to conditions and testing at the equipment level; it does notinclude all conditions and testing necessary for complete verification and validation of the vehicle system.Environmental and reliability testing at lower and higher levels are required to ensure that vehicle quality andreliability objectives are met.It addresses the following requirements relating to the design and manufacture of automotive components andof devices intended to be used in vehicles:- Environment. The conditions in and on a vehicle that a component or device must function within. Theseconditions include chemical, climatic, electromagnetic and mechanical factors and stress.- Power management. The requirements for power supply and delivery from a vehicle to its componentsand the devices used in that vehicle.- Interconnectivity. The requirements for delivering data within a vehicle. These requirements differdepending on the delivery method selected by the automaker or supplier.- Packaging. The standards for locating, securing, protecting, and enclosing or covering components anddevices.- Homologation. An overview of the legal requirements that apply to AMI-C compliant vehicles.- Diagnostic functional requirements. An overview of the sensing and analysis that AMI-C compliantcomponents and devices shall support. This section also recommends characteristics of diagnostic tools.