BS EN 60947-2-2006+A1-2009 低压开关设备和控制设备.断路器

标准号：BS EN 60947-2-2006+A1-2009
中文标准名称：低压开关设备和控制设备.断路器
英文标准名称：Low-voltage switchgear and controlgear - Circuit-breakers
标准类型：K30
发布日期：2006/9/29 12:00:00
实施日期：2006/9/29 12:00:00
中国标准分类号：K30
国际标准分类号：29.130.20
引用标准：IEC 61008-1-1996;IEC 61008-1 AMD 1-2002;IEC 61008-1 AMD 2-2006;IEC 60050-441-1984;IEC 60051;IEC 60068-2-14-1984;IEC 60068-2-30-2005;IEC 60050-441 AMD 1-2000;IEC 60068-2-14 AMD 1-1986;IEC 60364;IEC 60417;IEC 60617;IEC 60695-2-10-2000;IEC 60695-2-11-2000;IE
适用范围：This standard applies to circuit-breakers, the main contacts of which are intended to be connected to circuits, the rated voltage of which does not exceed 1 000 V a.c. or 1 500 V d.c.;it also contains additional requirements for integrally fused circuit-breakers.It applies whatever the rated currents, the method of construction or the proposed applicationsof the circuit-breakers may be.The requirements for circuit-breakers which are also intended to provide earth-leakage protection are contained in Annex B.The additional requirements for circuit-breakers with electronic over-current protection are contained in Annex F.The additional requirements for circuit-breakers for IT systems are contained in Annex H.The requirements and test methods for electromagnetic compatibility of circuit-breakers are contained in Annex J.The requirements for circuit-breakers not fulfilling the requirements for over-current protectionare contained in Annex L.The requirements for modular residual current devices (without integral current breakingdevice) are contained in Annex M.The requirements and test methods for electromagnetic compatibility of circuit-breakerauxiliaries are contained in Annex N.Supplementary requirements for circuit-breakers used as direct-on-line starters are given in IEC 60947-4-1, applicable to low-voltage contactors and starters.The requirements for circuit-breakers for the protection of wiring installations in buildings andsimilar applications, and designed for use by uninstructed persons, are contained in IEC 60898.The requirements for circuit-breakers for equipment (for example electrical appliances) are contained in IEC 60934.For certain specific applications (for example traction, rolling mills, marine service) particular or additional requirements may be necessary.NOTE Circuit-breakers which are dealt with in this standard may be provided with devices for automatic opening under predetermined conditions other than those of over-current and undervoltage as, for example, reversal of power or current. This standard does not deal with the verification of operation under such pre-determined conditions.The object of this standard is to state:a) the characteristics of circuit-breakers;b) the conditions with which circuit-breakers shall comply with reference to:1) operation and behaviour in normal service;2) operation and behaviour in case of overload and operation and behaviour in case ofshort-circuit, including co-ordination in service (discrimination and back-up protection);3) dielectric properties;c) tests intended for confirming that these conditions have been met and the methods to beadopted for these tests;d) information to be marked on or given with the apparatus.