IEC 62044-3-2000 软磁性材料制成的磁芯.测量方法.第3部分:高冲击水平的磁化特性

标准号：IEC 62044-3-2000
中文标准名称：软磁性材料制成的磁芯.测量方法.第3部分:高冲击水平的磁化特性
英文标准名称：Cores made of soft magnetic materials - Measuring methods - Part 3: Magnetic properties at high excitation level
标准类型：L19
发布日期：1999/12/31 12:00:00
实施日期：1999/12/31 12:00:00
中国标准分类号：L19
国际标准分类号：29.100.10
适用范围：This standard provides measuring methods for power loss and amplitude permeability of magnetic cores forming the closed magnetic circuits intended for use at high excitation levels in inductors, chokes, transformers and similar devices for power electronics applications. The methods given in this standard can cover the measurement of magnetic properties for frequencies ranging practically from d.c. to 10 MHz, and even possibly higher, for the calorimetric and reflection methods. The applicability of the individual methods to specific frequency ranges is dependent on the level of accuracy that is to be obtained. The methods in this standard are basically the most suitable for sine-wave excitations. Other periodic waveforms can also be used; however, adequate accuracy can only be obtained if the measuring circuitry and instruments used are able to handle and process the amplitudes and phases of the signals involved within the frequency spectrum corresponding to the given induction and field strength waveforms with only slightly degraded accuracy. NOTE It may be necessary for some magnetically soft metallic materials to follow specific general principles, customary for these materials, related to the preparation of specimens and prescribed calculations. These principles are formulated in IEC 60404-8-6.