BS 7081-1-1989 使用IMFM以252次磁通变换/mm(6400次磁通变换/in)速率录制的数据交换用6.30mm(0.25in)磁带盒的使用和制造指南.机械、物理和磁性能

标准号：BS 7081-1-1989
中文标准名称：使用IMFM以252次磁通变换/mm(6400次磁通变换/in)速率录制的数据交换用6.30mm(0.25in)磁带盒的使用和制造指南.机械、物理和磁性能
英文标准名称：Guide to construction and use of 6.30 mm (0.25 in) magnetic tape cartridge using IMFM for data interchange, recording at 252 ftpmm (6400 ftpi). Mechanical, physical and magnetic properties
标准类型：L64
发布日期：1989/6/30 12:00:00
实施日期：1989/6/30 12:00:00
中国标准分类号：L64
国际标准分类号：35.220.23
适用范围：ISO 8063 specifies the characteristics of a tape cartridge using 6,30 mm (0.25 in) wide magnetic tape for data interchange be-tween data processing systems. ISO 8063/2 specifies the quality of the recorded signals, and the track format to be used on a 6,30 mm (0.25 in) magnetic tape cartridge recorded at 252 ftpmm (6 400 ftpi) using IMFM recording and the start/stop mode of operation. This part of ISO 8063 specifies the dimensional, physical and magnetic characteristics of the cartridge, and the track layout. Together with the labelling scheme specified in ISO 4341, ISO 8063/1 and ISO 8063/2 provide for full data interchange between data processing systems. NOTE —Numeric values in the SI and/or Imperial measurement system in this part of ISO 8063 may have been rounded off and therefore are consistent with, but not exactly equal to, each other. Either system may be used, but the two should be neither intermixed nor reconverted. The original design was made using the Imperial measurement system. ISO 8063 applies to cartridges used for data interchange. Where it applies for testing only, this is specifically stated.