SAE J 1453/1-2012 O型圈面密封连接器规格:第1部分:管连接详情及性能和试验通用要求

标准号：SAE J 1453/1-2012
中文标准名称：O型圈面密封连接器规格:第1部分:管连接详情及性能和试验通用要求
英文标准名称：Specification for O-Ring Face Seal Connectors: Part 1 Tube Connection Details and Common Requirements for Performance and Tests
标准类型：T33
发布日期：2012/5/3 12:00:00
实施日期：1999/12/31 12:00:00
中国标准分类号：T33
国际标准分类号：23.040.80
引用标准：ANSI B 4.2;ASME B1.1-2003;ASME B46.1-2009;ASTM B 117-2011;ASTM B 633-2011;ISO 48-2010;ISO 68-2-1998;ISO 2768-1-1989;ISO 3304-1985;ISO 3305-1985;ISO 3448-1992;ISO 4397-2011;ISO 5598-2008;ISO 5864-1993;ISO 6149-2-2006;ISO 6508-1986;ISO 6803-2008;ISO 8434-3-
适用范围：The three parts of SAE J 1453 cover material, dimensional, and performance requirements of steel O-ring face seal (ORFS) connectors for tubing and the O-ring face seal interface and nut portion of hose stem assemblies for normal tube diameters of 6 mm through 50 mm. These connectors are intended for general application and hydraulic systems on industrial equipment and commercial products, where elastomeric seals are acceptable to overcome leakage and variations in assembly procedures. These connectors are capable of providing leak proof full flow connections in hydraulic systems operating from 95 kPa vacuum to the working pressures shown in Tables 1 and 2. Since many factors influence the pressure at which a hydraulic system will or will not perform satisfactorily, these values should not be construed as guaranteed minimums. For any application, it is recommended that sufficient testing be conducted and reviewed by both the user and manufacturer to ensure that required performance levels are met. For use of these connectors in conditions outside the pressure and temperature limits specified, the manufacturers must be consulted. Both metric and inch tubing can be accommodated by changing only the sleeve to match the tube diameters. In the past, these connectors have been used predominantly with inch tubing. For new designs, the use of metric tubing should be considered.