ISO 14373-2006 电阻焊接.无涂层和有涂层低碳钢的点焊程序

标准号：ISO 14373-2006
中文标准名称：电阻焊接.无涂层和有涂层低碳钢的点焊程序
英文标准名称：Resistance welding - Procedure for spot welding of uncoated and coated low carbon steels
标准类型：J33
发布日期：1999/12/31 12:00:00
实施日期：1999/12/31 12:00:00
中国标准分类号：J33
国际标准分类号：25.160.10
引用标准：ISO 669;ISO 5182;ISO 10447;ISO 14270;ISO 14329
适用范围：This International Standard specifies requirements for resistance spot welding in the fabrication of assemblies of uncoated and metallic coated low carbon steel, comprising two or three sheets of metal, where the maximum single sheet thickness of components to be welded is within the range 0,4 mm to 3 mm, for the following materials:— uncoated steels;— hot-dip zinc or iron-zinc alloy (galvannealed) coated steel;— electrolytic zinc, zinc-iron, or zinc-nickel coated steel;— aluminium coated steel;— zinc-aluminium coated steel.This International Standard is applicable to the welding of sheets of the same or dissimilar thickness, where the thickness ratio is less than or equal to 3:1. It applies to the welding of three thicknesses, where the total thickness is less than or equal to 9 mm.Welding with the following types of equipment is within the scope of this International Standard:a) pedestal welding equipment;b) gun welders;c) automatic welding equipment where the components are fed by robots or automatic feeding equipment;d) multi welders;e) robotic welders.Information on appropriate welding equipment is given in Annex A, and information on spot welding conditions is given in Annex B. This information is provided for guidance only. Depending on the service conditions of the fabrication, the type of welding equipment, the characteristics of the secondary circuit, the electrode material, and the shape, it is possible that certain modifications are necessary. In such cases, further information may be obtained from the relevant application standard, where one exists.The welding of organic coated or primer coated steels is not within the scope of this International Standard.