ISO 8251-2011 铝和铝合金的阳极氧化.阳极氧化涂层耐磨性测量

标准号：ISO 8251-2011
中文标准名称：铝和铝合金的阳*氧化.阳*氧化涂层耐磨性测量
英文标准名称：Anodizing of aluminium and its alloys. Measurement of abrasion resistance of anodic oxidation coatings
标准类型：A29
发布日期：2011/2/1 12:00:00
实施日期：2011/2/1 12:00:00
中国标准分类号：A29
国际标准分类号：25.220.20
引用标准：ISO 565-1990;ISO 2360-2003;ISO 6344-1;ISO 8486-1-1996
适用范围：This International Standard specifies the following three test methods:a) abrasive-wheel-wear test method, determining the wear resistance and the wear index of anodicoxidation coatings on flat specimens of aluminium and its alloys;b) abrasive jet test method, comparing the resistance to abrasion of anodic oxidation coatings onaluminium and its alloys with that of a standard specimen or, alternatively, a reference specimen, by useof a jet of abrasive particles;c) falling sand abrasion method, determining the abrasion resistance with falling sand applied to thinanodic oxidation coatings.The use of these methods for coatings produced by hard anodizing is described in ISO 10074.