DIN EN ISO 11961-2009 石油和天然气工业.钢钻杆(ISO 11961-2008).英文版本EN ISO 11961-2008 + AC-2009
百检网 2021-07-20
标准号:DIN EN ISO 11961-2009
中文标准名称:石油和天然气工业.钢钻杆(ISO 11961-2008).英文版本EN ISO 11961-2008 + AC-2009
英文标准名称:Petroleum and natural gas industries - Steel drill pipe (ISO 11961:2008); English version EN ISO 11961:2008 + AC:2009
标准类型:E92
发布日期:2009/9/1 12:00:00
实施日期:1999/12/31 12:00:00
中国标准分类号:E92
国际标准分类号:75.180.10
引用标准:ISO 6506-1;ISO 6507-1;ISO 6508-1;ISO 6892;ISO 7500-1;ISO 9303;ISO 9304;ISO 9305;ISO 9402;ISO 9513;ISO 9598;ISO 10424-2;ISO/TR 9769;ISO/TR 10400;ISO 11484;ISO 13665;API SPEC 7-2;API RP 7G;ANSI/API 5C3;ASME Boiler and Pressure Vessel Code, Section IX;ASNT S
适用范围:This International Standard specifies the technical delivery conditions for steel drill-pipes with upset pipe-bodyends and weld-on tool joints for use in drilling and production operations in petroleum and natural gasindustries for three product specification levels (PSL-1, PSL-2 and PSL-3). The requirements for PSL-1 formthe basis of this International Standard. The requirements that define different levels of standard technicalrequirements for PSL-2 and PSL-3 are in Annex G.This International Standard covers the following grades of drill-pipe:-- grade E drill-pipe;-- high-strength grades of drill-pipe, grades X, G and S.A typical drill-pipe configuration is given, showing main elements and lengths (see Figure B.1). The maindimensions and masses of the grades of drill-pipe are given in both SI units (see Table A.1) and in USC units(see Table C. 1 ).This International Standard can also be used for drill-pipe with tool joints not specified by ISO or APIstandards.By agreement between purchaser and manufacturer, this International Standard can also be applied to otherdrill-pipe body and/or tool-joint dimensions. This International Standard lists supplementary requirements thatcan optionally be agreed between purchaser and manufacturer, for testing, performance verification andnon-destructive examination (see Annex E).This International Standard does not consider performance properties.NOTE 1 In this International Standard, drill-pipe is designated by label 1, label 2, grade of material .(E, X, G and S),upset type and type of rotary shouldered connection. Designations are used for the purpose of identification in ordering.NOTE 2 Reference can be made to ISO 10424-2 or API Spec 7-2 for the detailed requirements for the threading ofdrill-pipe tool joints.NOTE 3 Reference can be made to API RP 7G for the performance properties of the drill-pipe.
百检能给您带来哪些改变?
1、检测行业全覆盖,满足不同的检测;
2、实验室全覆盖,就近分配本地化检测;
3、工程师一对一服务,让检测更精准;
4、免费初检,初检不收取检测费用;
5、自助下单 快递免费上门取样;
6、周期短,费用低,服务周到;
7、拥有CMA、CNAS、CAL等权威资质;
8、检测报告权威有效、中国通用;