DIN EN 868-2-2009 最终灭菌医疗器械的包装.第2部分:消毒包裹物.试验方法和要求.英文版本DIN EN 868-2-2009-09

标准号：DIN EN 868-2-2009
中文标准名称：*终灭菌医疗器械的包装.第2部分:消毒包裹物.试验方法和要求.英文版本DIN EN 868-2-2009-09
英文标准名称：Packaging for terminally sterilized medical devices - Part 2: Sterilization wrap - Requirements and test methods; English version of DIN EN 868-2:2009-09
标准类型：C08
发布日期：1999/12/31 12:00:00
实施日期：1999/12/31 12:00:00
中国标准分类号：C08
国际标准分类号：11.080.30
引用标准：EN 20187;EN 20535;EN 20811;EN 21974;EN 29073-3;EN ISO 536;EN ISO 1924-2;EN ISO 2758;EN ISO 11607-1-2006;EN ISO 13937-1;EN ISO 13938-1;ISO 3689;ISO 3781;ISO 5636-3;ISO 6588-2-2005;ISO 8601;ISO 9197;ISO 9198;ISO 9237
适用范围：This part of EN 868 provides test methods and values for materials for sterile barrier systems and/orpackaging systems that are intended to maintain sterility of terminally sterilized medical devices to the point ofuse.NOTE 1 The need for a protective packaging may be determined by the manufacturer and the user.This part of EN 868 only introduces performance requirements and test methods that are specific to theproducts covered by this part of EN 868 but does not add or modify the general requirements specified inEN ISO 11607-1.As such, the particular requirements in 4.2 can be used to demonstrate compliance with one or more but notall of the requirements of EN ISO 11607-1.NOTE 2 When additional materials are used inside the sterile barrier system in order to ease the organization, dryingor aseptic presentation (e.g. inner wrap, container filter, indicators, packing lists, mats, instrument organizer sets, trayliners or an additional envelope around the medical device) then other requirements, including the determination of theacceptability of these materials during validation activities, may apply.The materials specified in 4.2.2.1 to 4.2.2.3 of this part of EN 868 are intended for single use, the materialsspecified in 4.2.2.4 are intended for reuse.NOTE 3 If the intended purpose according to the manufacturer of the material for sterile barrier system specifies theuse as sterile field, then the additional requirements of the EN 13795 series apply.