ISO 16000-10-2006 室内空气.第10部分:建筑产品和家具释放挥发性有机化合物的测定.释放试验室法

标准号：ISO 16000-10-2006
中文标准名称：室内空气.第10部分:建筑产品和家具释放挥发性有机化合物的测定.释放试验室法
英文标准名称：Indoor air - Part 10: Determination of the emission of volatile organic compounds from building products and furnishing - Emission test cell method
标准类型：Z15
发布日期：1999/12/31 12:00:00
实施日期：1999/12/31 12:00:00
中国标准分类号：Z15
国际标准分类号：13.040.20
适用范围：This part of ISO 16000 specifies a general laboratory test method for determination of the area specificemission rate of volatile organic compounds (VOCs) from newly produced building products or furnishingunder defined climate conditions. The method can in principle also be applied to aged products. The emissiondata obtained can be used to calculate concentrations in a model room.According to the definition of an emission test cell, it is also possible to perform non-destructive emissionmeasurements on building products on-site in buildings. However, the procedure for such measurements isnot described in this part of ISO 16000.Sampling, transport and storage of materials to be tested, and preparation of test specimens are described inISO 16000-11. Air sampling and analytical methods for the determination of VOCs are described inISO 16000-6 and ISO 16017-1[20].An example of an emission test cell is described in Annex C of this part of ISO 16000.For the determination of formaldehyde emissions from wood-based panels, refer to EN 717-1:2004 [21] andISO 12460-1 [1]. However, this part of ISO 16000 is also applicable to wood-based panels and other buildingproducts in order to determine the emission rate of formaldehyde. The measurement procedure forformaldehyde is described in ISO 16000-3 [2].