BS EN 14886-2008 橡胶和塑料机械.块状塑料泡沫用带刀切削机.安全要求

标准号：BS EN 14886-2008
中文标准名称：橡胶和塑料机械.块状塑料泡沫用带刀切削机.安全要求
英文标准名称：Plastics and rubber machines - Bandknife cutting machines for block foams - Safety requirements
标准类型：C66;G95
发布日期：2008/3/31 12:00:00
实施日期：2008/3/31 12:00:00
中国标准分类号：C66;G95
国际标准分类号：83.200
引用标准：EN 394-1992;EN 349;EN 811;EN 894-1;EN 894-2;EN 894-3;EN 953;EN 954-1-1996;EN 1760-2;EN 1760-3;EN 12413;EN 13236;EN 60204-1-2006;EN 60529-1991;EN 61310-1;EN 61310-2;EN 61496-1-2004;EN ISO 3744-1995;EN ISO 3746-1995;EN ISO 4871-1996;EN ISO 11201-1995;EN ISO
适用范围：This European standard applies to machines that are designed specifically to cut, split or peel block foams tocommercially required shapes, using a single or double cut.All hazards listed in clause 4 are covered by this document.Cutting of block foams may be by: vertical cutting; horizontal cutting; inclined cutting; transverse cutting; contour cutting; or a combination of the above.The material to be cut may be supported or transported by: a fixed table; a shuttle table; a conveyor; a turntable; rollers; mandrel; or a combination of the above.Cutting can be either manual or automatic.Cutting tools can be: smooth-edged or toothed bandknives; cutting wires.Movement of the cutting tool can be either oscillating or continuous in one direction.This European Standard does not apply to: laser and water jet cutting; hot wire cutting; wood, metal and food cutting machines.The safety requirements for the additional hazards arising from the interaction between bandknife cuttingmachines and ancillary equipment, especially loading and unloading devices, are specified. The safetyrequirements for the ancillary equipment itself are not specified.This European Standard covers machines used for cutting plastics and rubber having a cellular or compactstructure. However, it may also be applied when these machines are used for cutting other materials, forexample textiles, fibres and mineral wool, if cutting these materials does not create additional hazards.This document is not applicable to bandknife cutting machines manufactured before the date of its publicationas an EN.