ISO 16852-2008 灭火器.性能要求、试验方法和使用限制

百检网 2021-07-20
标准号:ISO 16852-2008
中文标准名称:灭火器.性能要求、试验方法和使用限制
英文标准名称:Flame arresters - Performance requirements, test methods and limits for use
标准类型:C84
发布日期:1999/12/31 12:00:00
实施日期:1999/12/31 12:00:00
中国标准分类号:C84
国际标准分类号:13.220.10
引用标准:IEC 60079-1;IEC 60079-1-1-2002
适用范围:This International Standard specifies the requirements for flame arresters that prevent flame transmissionwhen explosive gas-air or vapour-air mixtures are present. It establishes uniform principles for theclassification, basic construction and information for use, including the marking of flame arresters, andspecifies test methods to verify the safety requirements and determine safe limits of use.This International Standard is valid for pressures ranging from 80 kPa to 160 kPa and temperatures rangingfrom -20 ~C to +150 ~C.NOTE 1 In designing and testing flame arresters for operation under conditions other than those specified above, thisInternational Standard can be used as a guide. However, additional testing related specifically to the intended conditionsof use is advisable. This is particularly important when high temperatures and pressures are applied. The test mixturesmight need to be modified in these cases.This International Standard is not applicable to the following:-- external safety-related measurement and control equipment that might be required to keep the operational conditions within the established safe limits; NOTE 2 Integrated measurement and control equipment, such as integrated temperature and flame sensors as well as parts which, for example, intentionally melt (retaining pin), bum away (weather hoods) or bend (bimetallic strips), is within the scope of this Intemational Standard.-- flame arresters used for explosive mixtures of vapours and gases, which tend to self-decompose (e.g. acetylene) or which are chemically unstable;-- flame arresters used for carbon disulphide, due to its special properties;-- flame arresters whose intended use is for mixtures other than gas-air or vapour-air mixtures (e.g. higher oxygen-nitrogen ratio, chlorine as oxidant, etc.);-- flame arrester test procedures for internal-combustion compression ignition engines;-- fast acting valves, extinguishing systems and other explosion isolating systems;-- flame arresters integrated or combined with explosion-protected equipment, such as blowers, fans, compressors and pumps.

百检能给您带来哪些改变?

1、检测行业全覆盖,满足不同的检测;

2、实验室全覆盖,就近分配本地化检测;

3、工程师一对一服务,让检测更精准;

4、免费初检,初检不收取检测费用;

5、自助下单 快递免费上门取样;

6、周期短,费用低,服务周到;

7、拥有CMA、CNAS、CAL等权威资质;

8、检测报告权威有效、中国通用;

客户案例展示

  • 上海朗波王服饰有限公司
  • 浙江圣达生物药业股份有限公司
  • 天津市长庆电子科技有限公司
  • 上海纽特丝纺织品有限公司
  • 无锡露米娅纺织有限公司
  • 东方电气风电(凉山)有限公司