DIN EN 88-2-2008 燃气器具用压力调节器和相关安全装置.第2部分:入口压力最大为5巴及以下的燃气压力调节器

标准号：DIN EN 88-2-2008
中文标准名称：燃气器具用压力调节器和相关安全装置.第2部分:入口压力*大为5巴及以下的燃气压力调节器
英文标准名称：Pressure regulators and associated safety devices for gas appliances - Part 2: Pressure regulators for inlet pressures above 500 mbar up to and including 5 bar; English version of DIN EN 88-2:2008-03
标准类型：Q82;J16
发布日期：1999/12/31 12:00:00
实施日期：2008/3/1 12:00:00
中国标准分类号：Q82;J16
国际标准分类号：23.060.40
引用标准：EN 88-1-2007;EN 549;EN 682;EN 13611-2007;EN 13787;EN 60534-1-2005;EN 60534-2-3;EN ISO 228-1;EN ISO 6708;ISO 7-1;ISO 3419
适用范围：This European Standard specifies the safety, construction and performance requirements for pressureregulators (hereafter referred to as regulators) intended for use with gas burners and gas-burningappliances using fuel gases of the 15', 2nd and 3rd families. This European Standard covers typetesting only. It also provides additional information for the purchaser and user.This European Standard is applicable to regulators that may be tested independently of gas burnersand gas-burning appliances, which have a declared working pressure from above 500 mbar up to andincluding 5 bar.This European Standard is also applicable to regulators incorporating safety devices.NOTE 1 For safety accessories and pressure accessories, the requirements of EN 13611:2007, Annex F alsoapply.NOTE 2 Regulators conforming to EN 88-2 fulfil also the requirements of EN 88-1.Regulators intended to be used on pipe work installations for third family gases are also covered byEN 13785 and EN 13786.This European Standard is not applicable to:a) pressure regulators that are connected directly to mains pipe-work or to a container that maintains a standard distribution pressure;b) pressure regulators which use electrical auxiliary energy.