BS EN 60512-16-3-2008 电子设备用连接器.试验和测量.触点和终端的机械试验.试验16c:触点抗弯强度

标准号：BS EN 60512-16-3-2008
中文标准名称：电子设备用连接器.试验和测量.触点和终端的机械试验.试验16c:触点抗弯强度
英文标准名称：Connectors for electronic equipment - Tests and measurements - Part 16-3: Mechanical tests on contacts and terminations – Test 16c: Contact-bending strength
标准类型：L23
发布日期：2009/1/31 12:00:00
实施日期：2009/1/31 12:00:00
中国标准分类号：L23
国际标准分类号：31.220.10
引用标准：IEC 60512-1-1
适用范围：This part of IEC 60512, when required by the detail specification, is used for testing electricalconnectors within the scope of technical committee 48. It may also be used for similar deviceswhen specified in a detail specification.The object of this part of IEC 60512 is to detail a standard test method to determine the abilityof a contact to withstand a specified bending moment or force. If so specified in the detailspecification, forces other than bending may be applied.Although this test is illustrated for the mating area of cylindrical contacts, and is particularlyapplicable to those with a mating diameter of 1,2 mm or less, its use for contacts with othergeometries is not excluded. In which case, the detail specification shall contain sufficientdetail, given under Clause 6, i), j) and k), to enable the test to be done. Furthermore, it maybe used for any part of a connector (such as a keying or polarizing device; cable support orcontact latching feature) provided that sufficient detail is given in the detail specification.NOTE In some cases, IEC 60068-2-21 may be cited in the detail specification.