DIN EN 61158-4-13-2008 工业通讯网络.现场总线规范.第4-13部分:数据联络层协议规范.13型元件.仅为CD-ROM

标准号：DIN EN 61158-4-13-2008
中文标准名称：工业通讯网络.现场总线规范.第4-13部分:数据联络层协议规范.13型元件.仅为CD-ROM
英文标准名称：Industrial communication networks - Fieldbus specifications - Part 4-13: Data-link layer protocol specification - Type 13 elements (IEC 61158-4-13:2007); English version EN 61158-4-13:2008, only on CD-ROM
标准类型：P76;N18
发布日期：1999/12/31 12:00:00
实施日期：2008/9/1 12:00:00
中国标准分类号：P76;N18
国际标准分类号：35.100.20;35.160;35.240.50
引用标准：IEC 61158-3-13;ISO/IEC 7498-1;ISO/IEC 7498-3;ISO/IEC 8802-3-2000;ISO/IEC 10731
适用范围：1.1 GeneralThe data-link layer provides basic time-critical messaging communications between devices in anautomation environment.This protocol provides communication opportunities to all participating data-link entitiesa) in a synchronously-starting cyclic manner, according to a pre-established schedule, andb) in a cyclic or acyclic asynchronous manner, as requested each cycle by each of those data-linkentities.Thus this protocol can be characterized as one which provides cyclic and acyclic accessasynchronously but with a synchronous restart of each cycle.1.2 SpecificationsThis standard specifiesa) procedures for the timely transfer of data and control information from one data-link user entityto a peer user entity, and among the data-link entities forming the distributed data-link serviceprovider;b) procedures for giving communications opportunities to all participating DL-entities, sequentiallyand in a cyclic manner for deterministic and synchronized transfer at cyclic intervals up to onemillisecond;c) procedures for giving communication opportunities available for time-critical data transmissiontogether with non-time-critical data transmission without prejudice to the time-critical datatransmission;d) procedures for giving cyclic and acyclic communication opportunities for time-critical datatransmission with prioritized access;e) procedures for giving communication opportunities based on standard ISO/ IEC 8802-3 mediumaccess control, with provisions for nodes to be added or removed during normal operation;f) the structure of the fieldbus DLPDUs used for the transfer of data and control information by theprotocol of this standard, and their representation as physical interface data units.1.3 ProceduresThe procedures are defined in terms ofa) the interactions between peer DL-entities (DLEs) through the exchange of fieldbus DLPDUs;b) the interactions between a DL-service (DLS) provider and a DLS-user in the same systemthrough the exchange of DLS primitives;c) the interactions between a DLS-provider and a Ph-service provider in the same system throughthe exchange of Ph-service primitives.1.4 ApplicabilityThese procedures are applicable to instances of communication between systems which supporttime-critical communications services within the data-link layer of the OSI or fieldbus referencemodels, and which require the ability to interconnect in an open systems interconnectionenvironment.Profiles provide a simple multi-attribute means of summarizing an implementation’s capabilities, andthus its applicability to various time-critical communications needs.1.5 ConformanceThis standard also specifies conformance requirements for systems implementing theseprocedures. This standard does not contain tests to demonstrate compliance with suchrequirements.