SAE AMS 3306C-2014 硅树脂橡胶,1200 psi(8.27 MPa),高模55-65

标准号：SAE AMS 3306C-2014
中文标准名称：硅树脂橡胶,1200 psi(8.27 MPa),高模55-65
英文标准名称：Rubber, Silicone 1200 psi (8.27 MPa), High Modulus 55 - 65
标准类型：V13
发布日期：2014/5/27 12:00:00
实施日期：1999/12/31 12:00:00
中国标准分类号：V13
国际标准分类号：49.025.40
引用标准：ASTM D 395-2003;ASTM D 412-2006;ASTM D 471-2012;ASTM D 573-2004;ASTM D 624-2000;ASTM D 635-2010;ASTM D 792-2013;ASTM D 797-1982;ASTM D 2137-2011;MIL-STD-810-2008;SAE AMS 2279;SAE AMS 3021B-1994;AMS2810;AS1241;MAM2270
适用范围：This specification covers a silicone elastomer in the form of sheet, strip, tubing, extrusions, and molded shapes. These products have been used typically as seals from -65 degrees to +225 degrees C (-85 degrees to +437 degrees F), compounded especially for high strength. Silicone rubber is resistant to deterioration by weathering and by high-aniline-point petroleum-base lubricating oil and phosphate ester hydraulic fluid, and remains flexible over the temperature range noted. This material is not normally suitable for use in contact with hydrocarbon-based fuels and low-aniline-point petroleum-base fluids due to excessive swelling of the elastomer, but usag