DIN ISO 20401-2007 气动液压传动系统.方向控制阀.直径为8mm～12mm的圆形电连接器的管脚分配规范(ISO 20401-2005+勘误1-2005)

标准号：DIN ISO 20401-2007
中文标准名称：气动液压传动系统.方向控制阀.直径为8mm～12mm的圆形电连接器的管脚分配规范(ISO 20401-2005+勘误1-2005)
英文标准名称：Pneumatic fluid power systems - Directional control valves - Specification of pin assignment for electrical round connectors of diameters 8 mm and 12 mm (ISO 20401:2005 + Cor. 1:2005) English version of DIN ISO 20401:2007-07
标准类型：J20
发布日期：2007/7/1 12:00:00
实施日期：1999/12/31 12:00:00
中国标准分类号：J20
国际标准分类号：23.100.50
引用标准：ISO 1219-1;ISO 5598;ISO 11727;IEC 60947-5-2-2004
适用范围：This International Standard specifies the pin assignment for pneumatic directional control valves when usedtogether with electrical connectors according to IEC 60947-5-2. This definition is valid for connectors asshown in Figures D.2 and D.4 of IEC 60947-5-2:2004, which are shown in a simplified version below:--- Figure D.2: 12-mm diameter, five-pin connector (pin 5, not shown, is unassigned), male face view-- Figure D.4: 8-mm diameter, four-pan connector, male face view