IEC 61131-2-2007 可编程控制器.第2部分:设备要求和试验

标准号：IEC 61131-2-2007
中文标准名称：可编程控制器.第2部分:设备要求和试验
英文标准名称：Programmable controllers - Part 2: Equipment requirements and tests
标准类型：N18
发布日期：1999/12/31 12:00:00
实施日期：1999/12/31 12:00:00
中国标准分类号：N18
国际标准分类号：25.040.40;35.240.50
引用标准：IEC 60060-1-1992;IEC 60068-2-1-2007;IEC 60068-2-2-1974;IEC 60068-2-6-1995;IEC 60068-2-14-1984;IEC 60068-2-27-1987;IEC 60068-2-30-2005;IEC 60068-2-31-1969;IEC 60068-2-32-1975;IEC 60364-1-2005;IEC 60364-4-41-2005;IEC 60417;IEC 60529-2001;IEC 60664-1-1992;IE
适用范围：This part of IEC 61131 specifies requirements and related tests for programmable controllers(PLCs) and their associated peripherals (for example, programming and debugging tools(PADTs), human-machine interfaces (HMIs), etc.) which have as their intended use thecontrol and command of machines and industrial processes.PLCs and their associated peripherals are intended to be used in an industrial environmentand may be provided as open or enclosed equipment. If a PLC or its associated peripheralsare intended for use in other environments (light industrial, commercial, residential), then thespecific requirements, standards and installation practices for those other environmentsshould be additionally applied to the PLC and its associated peripherals.This standard also applies to any products performing the function of PLCs and/or theirassociated peripherals.Equipment covered in this standard is intended for use in overvoltage category II (IEC 60664-1)in low-voltage installations, where the rated equipment supply voltage does not exceed a.c.1 000 V r.m.s. (50/60 Hz), or d.c. 1 500 V. (If PLCs or their associated peripherals are appliedin overvoltage category III installations, then additional analysis will be required to determinethe suitability of the equipment for those applications.)This standard does not deal with the functional safety or other aspects of the overallautomated system. PLCs, their application programme and their associated peripherals areconsidered as components of a control system.Since PLCs are component devices, safety considerations for the overall automated systemincluding installation and application are beyond the scope of this standard. Refer toIEC 60364-1 or applicable national/local regulations for electrical installation and guidelines.However, PLC safety as related to electric shock and fire hazards, electrical interferenceimmunity and error detecting of the PLC-system operation (such as the use of parity checking,self-testing diagnostics, etc.), are addressed.This standard also specifiesa) service, storage and transportation requirements for PLCs and their associatedperipherals (Clause 4);b) functional requirements for PLCs and their associated peripherals (Clause 5);c) EMC requirements for PLCs and their associated peripherals (Clause 8);d) safety requirements for PLCs and their associated peripherals (Clause 11);e) information that the manufacturer is required to supply (Clauses 7, 10 and 14);f) test methods and procedures that are to be used for the verification of compliance ofPLCs and their associated peripherals with the requirements (Clauses 6, 9 and 12).g) safety routine tests for PLCs and their peripherals (Clause 13).The tests are type tests or production routine tests, and not tests related to the ways PLCsystems are applied.