ISO 3497-2000 金属覆盖层 镀层厚度的测量 X射线光谱法

标准号：ISO 3497-2000
中文标准名称：金属覆盖层 镀层厚度的测量 X射线光谱法
英文标准名称：Metallic coatings - Measurement of coating thickness - X-ray spectrometric methods
标准类型：A29
发布日期：1999/12/31 12:00:00
实施日期：1999/12/31 12:00:00
中国标准分类号：A29
国际标准分类号：17.040.20
适用范围：WARNING Problems concerning protection of personnel against X-rays are not covered by this International Standard. For information on this important aspect, reference should be made to current international and national standards, and to local regulations, where these exist. 1 This International Standard specifies methods for measuring the thickness of metallic coatings by the use of X-ray spectrometric methods. 2 The measuring methods to which this International Standard applies are fundamentally those that determine the mass per unit area. Using a knowledge of the density of the coating material, the results of measurements can also be expressed as linear thickness of the coating. 3 The measuring methods permit simultaneous measurement of coating systems with up to three layers, or simultaneous measurement of thickness and compositions of layers with up to three components. 4 The practical measurement ranges of given coating materials are largely determined by the energy of the characteristic X-ray fluorescence to be analysed and by the acceptable measurement uncertainty and can differ depending upon the instrument system and operating procedure used.