ASME MFC-9M-1988 在封闭导管中用称重法测量液体流量
百检网 2021-08-03
标准号:ASME MFC-9M-1988
中文标准名称:在封闭导管中用称重法测量液体流量
英文标准名称:Measurement of Liquid Flow in Closed Conduits by Weighing Methods Errata - December 1989
标准类型:A52
发布日期:1988/1/1 12:00:00
实施日期:1999/12/31 12:00:00
中国标准分类号:A52
国际标准分类号:17.120.10
适用范围:This Standard specifies a method of liquid flow rate measurement in closed conduits by measuring the mass of liquid delivered into a weighing tank in a known time interval. It deals in particular with the measuring apparatus, procedure, and method for calculating the flow rate and the uncertainties associated with the measurement. The method described may be applied to any liquid, provided that its vapor pressure is such that any escape of liquid from the weighing tank by vaporization is not sufficient to effect the required measurement accuracy. Closed weighing tanks and their application to the flow measurement of liquids of high vapor pressure are not considered in this Standard. This Standard considers only the measurement techniques and does not address any possible hazards involved in handling the liquid involved. Theoretically, there is no limit to the application of this method, which is used generally in fixed laboratory installations only. However, for economic reasons, typical hydraulic laboratories using this method can produce accurate flow rates of 500 kg/s (3300 lbm/sec) or less. Owing to its high potential accuracy, this method is often used as a primary method for calibration of other methods or devices for mass flow rate measurement or volumetric flow rate measurement, provided that the density of the liquid is known accurately. It must be ensured that the pipeline is running full with no air or vapor pockets present in the measuring section.
百检能给您带来哪些改变?
1、检测行业全覆盖,满足不同的检测;
2、实验室全覆盖,就近分配本地化检测;
3、工程师一对一服务,让检测更精准;
4、免费初检,初检不收取检测费用;
5、自助下单 快递免费上门取样;
6、周期短,费用低,服务周到;
7、拥有CMA、CNAS、CAL等权威资质;
8、检测报告权威有效、中国通用;