SAE AMS 4311E-2007 5.6Zn 2.5Mg 1.6Cu 0.23Cr (7075-T7351、7075-T352)溶解热处理、机械应力释放和沉淀热处理的铝合金轧制或锻制环材
百检网 2021-08-03
标准号:SAE AMS 4311E-2007
中文标准名称:5.6Zn 2.5Mg 1.6Cu 0.23Cr (7075-T7351、7075-T352)溶解热处理、机械应力释放和沉淀热处理的铝合金轧制或锻制环材
英文标准名称:Aluminum Alloy, Rolled or Forged Rings 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T7351, 7075-T7352) Solution Heat Treated, Mechanically Stress Relieved, and Precipitation Heat Treated UNS A97075
标准类型:V11
发布日期:2007/8/1 12:00:00
实施日期:1999/12/31 12:00:00
中国标准分类号:V11
国际标准分类号:49.025.20
引用标准:ASTM B 594-2006;ASTM B 660-2002;ASTM B 666/B 666M-2001;SAE AMS 2355H-2005;SAE AMS 2772-1997;SAE AS 1990-1990
适用范围:This specification covers an aluminum alloy in the form of rolled or forged rings. These rings have been used typically for applications requiring a combination of high strength, resistance to stress-corrosion cracking, and good stability during machining, but usage is not limited to such applications. Rings covered by this specification are classified by type of mechanical stress relief as follows: Type 1 - Stress-relieved by stretching (7075-T7351); and Type II - Stress-relieved by compression (7075-T7352). Either type may be supplied, unless a specific type is ordered.
百检能给您带来哪些改变?
1、检测行业全覆盖,满足不同的检测;
2、实验室全覆盖,就近分配本地化检测;
3、工程师一对一服务,让检测更精准;
4、免费初检,初检不收取检测费用;
5、自助下单 快递免费上门取样;
6、周期短,费用低,服务周到;
7、拥有CMA、CNAS、CAL等权威资质;
8、检测报告权威有效、中国通用;