DIN EN 200-2008 卫生设备用水龙头.1型和2型的供水系统用单一水龙头和组合水龙头.通用技术规范

标准号：DIN EN 200-2008
中文标准名称：卫生设备用水龙头.1型和2型的供水系统用单一水龙头和组合水龙头.通用技术规范
英文标准名称：Sanitary tapware - Single taps and combination taps for water supply systems of type 1 and type 2 - General technical specification; English version of DIN EN 200:2008-10
标准类型：Q81
发布日期：1999/12/31 12:00:00
实施日期：1999/12/31 12:00:00
中国标准分类号：Q81
国际标准分类号：91.140.70
引用标准：EN 246;EN 248;EN 1112;EN 1113;EN 1254-2;EN 1717;prEN 13618-1;prEN 13618-2;EN 14506;EN ISO 228-1;EN ISO 3822-1;EN ISO 3822-2;EN ISO 382-4-1997
适用范围： This European Standard specifies: a) the field of application for pillar taps, bib taps, single and multi-hole combination taps for use in: 1) a supply system of Type 1 (see Figure 1); 2) a supply system of Type 2 (see Figure 2); b) the dimensional, leaktightness, pressure resistance, hydraulic performance, mechanical strength, endurance and acoustic characteristics of nominal size 1/2 and 3/4 single taps and combination taps; c) test methods to verify the characteristics. The tests described in this European Standard are type tests (laboratory tests) and not quality control tests carried out during manufacture.) This European Standard applies to draw-off taps (single taps and combination taps) for use with sanitary appliances installed in rooms used for bodily hygiene (cloakrooms, bathrooms etc.) and in kitchens, i.e. for use with baths, wash basins, bidets, showers and sinks. Figure 1 shows a supply system of Type 1 with a pressure range of (0,05 to 1,0) Mpa [(0,5 to 10) bar]. Figure 2 shows a supply system of Type 2 with a pressure range of (0,01 to 1,0) Mpa [(0,1 to 10) bar]. This European Standard applies to sanitary draw-off taps of nominal size 1/2 and 3/4 (PN 10). The conditions of use and classifications are given in Table 1. The Table 2 gives the performance characteristics to be noted if the tap is used outside the recommended operating range.