IEC 61338-1-4-2005 波导型介电谐振器.第1-4部分:一般信息和试验条件.毫米波频率时介电谐振器材料的相对复介电常数测量方法

标准号：IEC 61338-1-4-2005
中文标准名称：波导型介电谐振器.第1-4部分:一般信息和试验条件.毫米波频率时介电谐振器材料的相对复介电常数测量方法
英文标准名称：Waveguide type dielectric resonators - Part 1-4: General information and test conditions - Measurement method of complex relative permittivity for dielectric resonator materials at millimetre-wave frequency
标准类型：L18
发布日期：1999/12/31 12:00:00
实施日期：1999/12/31 12:00:00
中国标准分类号：L18
国际标准分类号：31.140;33.120.10
引用标准：IEC 61338-1-3
适用范围：This part of IEC 61338 describes the measurement method of dielectric properties for dielectric resonator materials at millimetre-wave frequency.This standard consists of two measurement methods: a) the dielectric rod resonator method excited by NRD-guide (Non-Radiative Dielectric waveguide) and b) the cut-off waveguide method excited by coaxial cables with small loops.a) The dielectric rod resonator method excited by NRD-guide is similar to the dielectric rod resonator method given in IEC 61338-1-3. This method has the following characteristics:- a complete and exact mathematical solution of complex permittivity is given by computer software;- the measurement error is less than 0,3 % for s' and less than 0,05 x 10-4 for tan 8;- the applicable measuring ranges of complex permittivity for this method are as follows: frequency: 30 GHz < 100 GHz;relative permittivity: 2 < e' < 30;loss factor: 10~6 < tan 8 < 10~2.b) The cut-off waveguide method excited by coaxial cables with small loops uses a dielectric plate sample placed in a circular cylinder of the TE011 mode. This method has the following characteristics:- fringe effect is corrected using the correction charts on the basis of rigorous analysis;- the measurement error is less than 0,5 % for £' and less than 0,05 x10-4 for tan 8;- the TCF is measured with high accuracy;- the applicable measuring ranges of dielectric properties for this method are as follows: frequency: 30 GHz < 100 GHz;relative permittivity: 2 < s' < 30;loss factor: 10~6 < tan <5 < 10~2.