SAE J 2435-2008 双括口卷边弯曲的归一化闪光焊接控制的SAE 1021型低碳钢管

标准号：SAE J 2435-2008
中文标准名称：双括口卷边弯曲的归一化闪光焊接控制的SAE 1021型低碳钢管
英文标准名称：Welded Flash Controlled, SAE 1021 Carbon Steel Tubing, Normalized for Bending, Double Flaring, and Beading
标准类型：H48;T05
发布日期：2008/2/1 12:00:00
实施日期：1999/12/31 12:00:00
中国标准分类号：H48;T05
国际标准分类号：23.040.10
引用标准：ASTM A 450/A 450M-2007;ASTM A 513-2007;ASTM A 513-2008;ISO 3305-1985;ISO 5598-1985;ISO 8434-2-2007;ISO 8434-3-2005;ISO 10583-1993;ISO 10763-1994;SAE J 356-2006;SAE J 409-1995;SAE J 514-2004;SAE J 533-2007;SAE J 1065-2003;SAE J 1453-2002;SAE J 1677-2004;SA
适用范围：The SAE Standard covers normalized electric resistance welded flash controlled single-wall, SAE 1021 carbon steel pressure tubing intended for use as pressure lines and in other applications requiring tubing of a quality suitable for bending, double flaring, beading, and brazing. Material produced to this specification is not intended to be used for single flare applications due to the potential leak path that would be caused by the ID weld bead. The grade of material produced to this specification is higher in carbon content and manganese content than the grade of material specified in SAE J356. The material produced to this specification is intended to service higher pressure applications than like sizes of SAE J356. Due to the higher carbon and manganese content, however, the forming characteristics of the finished tube is diminished somewhat when compared to SAE J356. Special attention to the overall forming requirements of the finished assembly should be taken into consideration when utilizing material produced to this specification.ion when utilizing material produced to this specification.