ASME A112.19.3-2008 不锈钢管子附件

标准号：ASME A112.19.3-2008
中文标准名称：不锈钢管子附件
英文标准名称：Stainless Steel Plumbing Fixtures
标准类型：Q81
发布日期：1999/12/31 12:00:00
实施日期：1999/12/31 12:00:00
中国标准分类号：Q81
国际标准分类号：91.140.70
引用标准：CAN/CSA-B125.3-05;CAN/CSA-B651-04;C22.2 No. 0.15-01-R2006;ASME A112.18.1-2005/CAN/CSA-B125.1-05;ASME A112.18.2-2005/CAN/CSA-B125.2-05;ASME A112.19.2-2008/CSA B45.1-08;A 240/A 240M-08;A117.1-2003;969-1995
适用范围：1.1This Standard covers plumbing fixtures made of stainless steel alloys and specifies requirements formaterials, construction, performance, testing, and markings.Note: The term “corrosion-resisting steel” is also applied to stainless steel.1.2This Standard covers the following plumbing fixtures:(a) bathtubs;(b) bidets;(c) drinking fountains and water coolers;(d) lavatories;(e) shower bases;(f) urinals; and(g) sinks:(i) kitchen and bar sinks;(ii) laboratory sinks;(iii) laundry sinks;(iv) service sinks; and(v) utility sinks.1.3In this Standard, “shall” is used to express a requirement, i.e., a provision that the user is obliged to satisfy in order to comply with the standard; “should” is used to express a recommendation or that which isadvised but not required; “may” is used to express an option or that which is permissible within the limitsof the standard; and “can” is used to express possibility or capability. Notes accompanying clauses do not include requirements or alternative requirements; the purpose of a note accompanying a clause is toseparate from the text explanatory or informative material. Notes to tables and figures are considered part of the table or figure and may be written as requirements. Annexes are designated normative (mandatory)or informative (non-mandatory) to define their application.1.4 SI units are the units of record in Canada. In this Standard, the yard/pound units are shown in parentheses.The values stated in each measurement system are equivalent in application; however, each system is to beused independently. Combining values from the two measurement systems can result in non-conformancewith this Standard.All references to gallons are to U.S. gallons.For information on the unit conversion criteria used in this Standard, see Annex A.