DIN EN 12693-2008 制冷设备和热泵.安全性和环境要求.容积式制冷压缩机

标准号：DIN EN 12693-2008
中文标准名称：制冷设备和热泵.安全性和环境要求.容积式制冷压缩机
英文标准名称：Refrigerating systems and heat pumps - Safety and environmental requirements - Positive displacement refrigerant compressors; English version of DIN EN 12693:2008-09
标准类型：J72
发布日期：1999/12/31 12:00:00
实施日期：2008/9/1 12:00:00
中国标准分类号：J72
国际标准分类号：23.140
引用标准：EN 287-1;EN 294;EN 378-1-2008;EN 378-2-2008;EN 378-3;EN 378-4;EN 837-1;EN 837-3;EN 953;EN 1050;EN 1515;EN 1563;EN 1779;EN 10045-1;EN 10204;EN 12178;EN 12516-2;EN 13136-2001;EN 13445-2-2002;EN 13445-3;EN 20898;EN 60034-1-2004;EN 60204-1-2006;EN 60335-2-34
适用范围：This standard applies to positive displacement refrigerant compressors for stationary and mobile refrigeratingsystems and heat pumps defined in 3.1, hereafter called compressors. It applies for compressors used in commercial and industrial appliances and with electrical energy supplyincluding integral motors, up to 1 000 VAC and 1 500 VDC.It applies to open drive, semi hermetic and hermetic motor compressors, which contain a positivecompression function.This standard is not applicable to:-- compressors used in household appliance for which EN 60335-2-34 applies;-- compressors using water or air as refrigerant.This standard does not deal with requirements for vibration and noise.NOTE I Compressors for automotive comfort air conditioning systems can be developed according e.g. SAE J 639.NOTE 2 Noise emission depends on the complete installation of the built-in compressors and the correspondingoperating conditions. For semi-hermetic and open drive compressors which include moving parts and for which the external envelope is primarily designed for mechanical loads, thermal loads (to limit the possible deformation due to temperature), stiffness of the structure (external mechanical loads and weight of the equipment), taking into account established safe industrial practice, it is considered that pressure is not a significant design factor. Attached parts covering other functions e.g. oil separators, oil coolers, suction accumulators shall comply to EN 14276-1 or EN 13445-6 (cast iron) or EN 13445-8 (aluminium) or showing compliance to the relevant European requirements. This applies also to shells for hermetic compressors either welded or with any kind of permanent joint. Requirements for compressors used in explosive atmospheres are not covered by this standard. NOTE 3 For further guidance see EN 13463-1. This standard deals with all significant hazards, hazardous situations and events relevant to compressors, when they are used as intended and under conditions for misuse which are reasonably foreseeable by the manufacturer (see Clause 4).