ISO 21003-1-2008 建筑物内冷热水装置用多层管道系统.第1部分:总则

标准号：ISO 21003-1-2008
中文标准名称：建筑物内冷热水装置用多层管道系统.第1部分:总则
英文标准名称：Multilayer piping systems for hot and cold water installations inside buildings - Part 1: General
标准类型：Q81
发布日期：1999/12/31 12:00:00
实施日期：1999/12/31 12:00:00
中国标准分类号：Q81
国际标准分类号：91.140.60
引用标准：ISO 3;ISO 472;ISO 1043-1;ISO 15874-1;ISO 15874-2;ISO 15874-3;ISO 15874-5;ISO 15875-1;ISO 15875-2;ISO 15875-3;ISO 15875-5;ISO 15876-1;ISO 15876-2;ISO 15876-3;ISO 15876-5;ISO 15877-1;ISO 15877-2;ISO 15877-3;ISO 15877-5;ISO 21003-2;ISO 21003-3;ISO 21003-5;IS
适用范围：This part of ISO 21003 specifies the general aspects of multilayer piping systems intended to be used for hotand cold water installations inside buildings for the conveyance of water -- whether or not the water isintended for human consumption (domestic systems) or heating systems -- under specified design pressuresand temperatures appropriate to the class of application (see Table 1 ).ISO 21003 is a reference product standard (see 3 43) it is applicable to multilayer pipes, fittings, their joints,and also to joints with components made of other plastics and non-plastics materials intended to be used forhot and cold water installations. This part of ISO 21003 is intended for use only in conjunction with all theother parts of ISO 21003.ISO 21003 applies only to multilayer pipes with their inner layer made of plasticsIt covers a range of service conditions (application classes) and design pressures, g is not applicable forvalues of design temperature, TD1, maximum design temperature, Tmax, and malfunction temperature, Tmal, inexcess of those in Table 1NOTE I It is the responsibility of the purchaser or specifier to make the appropriate selections from these aspects,taking into account their particular requirements and any relevant national regulations and installation practices or codesThe polymeric materials used for the stress-designed layers are the following: polybutylene (PB), polyethyleneof raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP) andchlorinated poly(vinyl chloride) (PVC-C)The PE-X used shall be fully crosslinked and shall comply with the requirements of the relevant referenceproduct standard (ISO 15875)NOTE 2 For the purposes ef ISO 21OO3, cress[inked polyethylene (PEX) as well as adhesives are considered asthermoplastic materialsSolid-wall pipes with thin outer layers (applied as protection layers or barrier layers, for instance) are notcovered by ISO 21003 but are specified in the Amendments to ISO 15874-2, ISO 15875-2 and ISO 15876-2The total thickness of such outer layers, including the thickness of the adhesives used, shall be ≤0,4 mm