DIN EN 755-8-2008 铝和铝合金.挤压杆材/棒材、管材和型材.第8部分:带孔管材的尺寸和形状公差
百检网 2021-08-04
标准号:DIN EN 755-8-2008
中文标准名称:铝和铝合金.挤压杆材/棒材、管材和型材.第8部分:带孔管材的尺寸和形状公差
英文标准名称:Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 8: Porthole tubes, tolerances on dimensions and form; English version of DIN EN 755-8:2008-06
标准类型:H61
发布日期:1999/12/31 12:00:00
实施日期:1999/12/31 12:00:00
中国标准分类号:H61
国际标准分类号:77.150.10
适用范围:This document specifies the tolerances on dimensions and form for aluminium and aluminium alloy extrudedporthole tubes with an outside diameter (OD) from 8 mm to 450 mm (round tube, see Figure 1 ) or with a crosssection contained within a circumscribing circle (CD) from 10 mm to 350 mm (other than round tube, seeFigure 2), supplied in straight lengths.This standard only applies to extruded porthole tube for general engineering applications made in thefollowing alloys:-- EN AW-1050A, EN AW-1200, EN AW-1350;-- EN AW-3003, EN AW-3103;-- EN AW-5005, EN AW-500**, EN AW-5049, EN AW-5051A, EN AW-5251, EN AW-5052;-- EN AW-6101A, EN AW-6101B, EN AW-6005, EN AW-600**, EN AW-6008, EN AW-6110A, EN AW- 6012, EN AW-6014, EN AW-6018, EN AW-6351, EN AW-6060, EN AW-6360, EN AW-6061, EN AW- 6261, EN AW-6262, EN AW-6262A, EN AW-6063, EN AW-6063A, EN AW-6463, EN AW-6065, EN AW-6081, EN AW-6082; EN AW-6182,-- EN AW-7003, EN AW-7005, EN AW-7108, EN AW-7108A, EN AW-7020.The temper designations used in this part are according to EN 515.This standard only applies to tube produced by the tube porthole/bridge method.This standard does not apply to:-- extruded tubes produced by the seamless, die/mandrel method (EN 755-7),-- tubes delivered in coils (prEN 13957),-- coiled tubes cut to length (prEN 13957).
百检能给您带来哪些改变?
1、检测行业全覆盖,满足不同的检测;
2、实验室全覆盖,就近分配本地化检测;
3、工程师一对一服务,让检测更精准;
4、免费初检,初检不收取检测费用;
5、自助下单 快递免费上门取样;
6、周期短,费用低,服务周到;
7、拥有CMA、CNAS、CAL等权威资质;
8、检测报告权威有效、中国通用;