BS EN 15198-2007 潜在易爆环境中使用的非电气设备和部件的风险评估用方法学

标准号：BS EN 15198-2007
中文标准名称：潜在易爆环境中使用的非电气设备和部件的风险评估用方法学
英文标准名称：Methodology for the risk assessment of non-electrical equipment and components for intended use in potentially explosive atmospheres
标准类型：C67
发布日期：2007/10/31 12:00:00
实施日期：2007/10/31 12:00:00
中国标准分类号：C67
国际标准分类号：13.230
适用范围：This European Standard specifies basic methodology used in achieving safety of equipment for intended usein potentially explosive atmospheres.The provisions specified in this European Standard are intended for the designer. It also specifies a strategyfor standard makers.This European Standard specifies the procedure and information required to allow ignition risk assessment tobe carried out for the design of equipment or component.This European Standard provides advice for a decision to be made for the categorisation of equipment butdoes not provide means to prove the conformity of equipment categories.In this procedure the following information is to be taken into account:a) Possible occurrence of an explosive atmosphere inside the equipment or component or penetrating theequipment or component from the outside (in normal operation or during malfunctions) and the amount ofexplosive atmosphere involved leading to possible explosion impact inside of the equipment orcomponent;b) equipment or components surrounded by an explosive atmosphere (in normal operation or duringmalfunctions);c) equipment or components wholly or partly surrounded by an explosive atmosphere considering also anyexplosive atmosphere in connection (in normal operation or during malfunctions);d) presence and likelihood (effectiveness) of ignition sources.The final objective is designing and manufacturing equipment or components intended for use in potentiallyexplosive atmospheres. For this purpose equipment or components if necessary should be designed withadequate preventive and/or protective measures.This European Standard specifies neither specific methods of analysis associated with ignition riskassessment, nor specific requirements for a category of equipment. It describes the methodology of ignitionrisk assessment.This European Standard does not apply to equipment with a potentially explosive atmosphere inside underoperating conditions, and without interfaces to an external potentially explosive atmospheres.This European Standard is applicable to all categories of equipment referred to in EN 13463-1.This ignition risk assessment procedure does not preclude the conditions prevailing in an installation wherethe equipment or component is put into operation by a user.NOTE Functional safety assessment of protective systems is covered by EN 15233.