BS EN 1319-2009 净加热输入量不超过70kW的带有风扇辅助锅炉的家用空间加热燃气强制对流空气加热器

标准号：BS EN 1319-2009
中文标准名称：净加热输入量不超过70kW的带有风扇辅助锅炉的家用空间加热燃气强制对流空气加热器
英文标准名称：Domestic gas-fired forced convection air heaters for space heating, with fan-assisted burners not exceeding a net heat input of 70 kW
标准类型：Q83
发布日期：2010/1/31 12:00:00
实施日期：2010/1/31 12:00:00
中国标准分类号：Q83
国际标准分类号：97.100.20
引用标准：EN 88-1-2007;EN 125-1991;EN 126-2004;EN 161-2007;EN 257-1992;EN 298-2003;EN 437-2003;EN 1859-2000;EN 10226-1-2004;EN 10226-2-2005;EN 12067-1-1998;EN 60335-1-2002;EN 60335-2-102-2006;EN 60529-1991;EN 60584-1-1995;EN 60584-2-1993;EN 60730-2-1-1997;EN 60730-
适用范围：This European Standard specifies the requirements and test methods for the safety and efficiency of domestic gas-fired air heaters with a fan to assist the transportation of combustion air and/or combustion products, hereafter referred to as appliances.This European Standard applies to Type B12, B12AS, B12BS, B13, B13AS, B13BS, B14, B14AS, B14BS, B22, B23, B42, B42AS, B42BS, B43, B43AS, B43BS, B44, B44AS, B44BS, B52, B53, C12, C13, C32, C33, C62 and C63 appliances with an input not exceeding 70 kW (net cv basis), intended primarily for use in single unit residential dwellings. Provision ofthe heated air may be by means of ducting.This standard does not apply to:a) appliances of the condensing type;b) appliances for outdoor installation;c) dual purpose air conditioning appliances (heating and cooling);d) appliances where the air is heated by an intermediate fluid;e) appliances with forced draught package burners or fully premixed burners;f) appliances fitted with a manual means of adjusting the combustion air supply or the evacuation of thecombustion products;g) portable or transportable forced convection appliances;h) appliances having multiple heating units with a single draught diverter;i) appliances fitted with more than one flue outlet;j) Type C22, C23, C42, C43, C52 and C53 appliances;k) appliances that are designed for continuous condensation within the flue system under normaloperating conditions;l) appliances having combustion products evacuation ducts, POCEDs, that are non-metallic.This standard is applicable to appliances which are intended to be type tested. It also includes requirements concerning the evaluation of conformity, including factory production control, but these requirements only apply to POCEDs and their associated terminals.