BS 7080-2-1989 使用成组编码记录(GCR)以394次磁通变换/mm(10,000次磁通变换/in)、39字符/mm(1000字符/in)速率录制的数据交换用6.30mm(0.25in)磁

标准号：BS 7080-2-1989
中文标准名称：使用成组编码记录(GCR)以394次磁通变换/mm(10,000次磁通变换/in)、39字符/mm(1000字符/in)速率录制的数据交换用6.30mm(0.25in)磁带盒的制造和使用指南.流线型方式
英文标准名称：Guide to construction and use of 6.30 mm (0.25 in) magnetic tape cartridge using GCR for data interchange, recording at 394 ftpmm (10 000 ftpi), 39 cpmm (1 000 cpi) - Streaming mode
标准类型：L64
发布日期：1989/6/30 12:00:00
实施日期：1989/6/30 12:00:00
中国标准分类号：L64
国际标准分类号：35.220.23
适用范围：ISO 8462 specifies the characteristics of a tape cartridge loaded with magnetic tape 6,30 mm (0.25 in) wide intended for digital recording at physical recording densities of 252 ftpmm (6 400 ftpi) and 394 ftpmm (10 000 ftpi). ISO 8462/1 specifies the mechanical, physical and magnetic properties of a 6,30 mm (0.25 in) wide magnetic tape cartridge and methods for testing the surface quality of the tape. It also specifies the environmental conditions under which the car-tridge shall be tested and operated, and recommends condi-tions for storage. This part of ISO 8462 specifies a recording method and a data format intended for use in the streaming mode of operation. Two alternative track formats are specified : — a 4-track format, and — a 9-track format. ISO 8462/1 and ISO 8462/2 provide for the physical inter-change of cartridges between data processing systems, and specify a data format. A labelling standard for tape cartridges used in the streaming mode is under study. The availability of such a labelling standard will provide for full data interchange between data processing systems. NOTE —Numeric values in the SI and/or Imperial measurement system in this part of ISO 8462 may have been rounded off and therefore are consistent with, but not exactly equal to, each other. Either system may be used, but the two should be neither intermixed nor reconverted. The original design was made using the Imperial measurement system.