AS 1141.50-1983
百检网 2021-08-04
标准号:AS 1141.50-1983
发布日期:1983/7/7 12:00:00
实施日期:1999/12/31 12:00:00
适用范围: This standard sets out the method for the preparation, curing and assess-ment of resistance to stripping in the presence of moisture of samples of cover aggre-gates (with or without treatment with precoating materials) from bituminous binders (with or without the addition of binder adhesion agents).It is not applicable to aggregate particles which pass a 9.50 mm sieve.NOTES:1. The test detailed in this standard is also known as the 'Plate Test' or 'Stripping Test'.2. Compliance by an aggregate with the requirements of this test method does not mean that satisfactory adhesion will be obtained in the field application. Due allowance must be made for factors which affect adhesion and which may be present in the field application such as the following:(a) Cleanliness of the aggregate.(b) Effectiveness with which precoating has been carried out.(c) The use of flux oil.(d) Ambient temperature and wind conditions.(e) Temperature of sprayed bitumen.(f) Binder application rate.(g) Adequacy and timing of rolling.(h) Rainfall, particularly within 4 h of spreading, (j) Time elapsed before the area is open to traffic.
百检能给您带来哪些改变?
1、检测行业全覆盖,满足不同的检测;
2、实验室全覆盖,就近分配本地化检测;
3、工程师一对一服务,让检测更精准;
4、免费初检,初检不收取检测费用;
5、自助下单 快递免费上门取样;
6、周期短,费用低,服务周到;
7、拥有CMA、CNAS、CAL等权威资质;
8、检测报告权威有效、中国通用;