SAE AMS 5529J-2012 标称厚度为0.0015-0.050 in(0.038-1.27 mm)的沉淀硬化溶液热处理和冷轧耐腐蚀合金钢(17铬,7.1镍,1.1铝)板材和带材

标准号：SAE AMS 5529J-2012
中文标准名称：标称厚度为0.0015-0.050 in(0.038-1.27 mm)的沉淀硬化溶液热处理和冷轧耐腐蚀合金钢(17铬,7.1镍,1.1铝)板材和带材
英文标准名称：Steel, Corrosion Resistant, Sheet and Strip 17Cr 7.1Ni 1.1Al Solution Heat Treated and Cold Rolled, Precipitation Hardenable 0.0015 to 0.100 Inch (0.038 to 2.54 mm) Nominal Thickness
标准类型：V11
发布日期：2012/2/20 12:00:00
实施日期：1999/12/31 12:00:00
中国标准分类号：V11
国际标准分类号：49.025.10
引用标准：ASTM A 370-2011;ASTM E 353-1993;ASTM E 384-2011;SAE AMS 2242;SAE AMS 2248;SAE AMS 2371;SAE AMS 2807-1991;SAE ARP 1110
适用范围：This specification covers a corrosion-resistant steel in the form of sheet and strip 0.0015 to 0.100 inch (0.038 to 2.54 mm) in nominal thickness. These products have been used typically for parts such as springs requiring corrosion resistance and high strength up to 600 °F (316 °C), but usage is not limited to such applications. Strength of these cold-worked products will be impaired if parts require welding during fabrication. Certain design and processing procedures may causes these products to become subject to stress-corrosion cracking; SAE ARP 1110 recommends practices to minimize such conditions.