BS EN 61291-6-1-2008 光学放大器.接口.命令集

标准号：BS EN 61291-6-1-2008
中文标准名称：光学放大器.接口.命令集
英文标准名称：Optical amplifiers - Interfaces - Command set
标准类型：M33
发布日期：2009/3/31 12:00:00
实施日期：2009/3/31 12:00:00
中国标准分类号：M33
国际标准分类号：33.180.30
引用标准：ISO/IEC 8859-1
适用范围：This part of IEC 61291 describes the optical amplifier command set (OACS) for use incommunicating with and controlling intelligent optical amplifiers. These amplifiers can receiveand possibly respond to such commands by using resident firmware or may be opticalamplifiers controlled by a microprocessor.This standard addresses the structure and content of the command set to control opticalamplifiers. It does not cover the physical or hardware interface, which is assumed to exist forcommunication of this command set to the optical amplifier. The specification of a physicalinterface will be the subject of a separate Part to be developed in the IEC 61291-6 series.The command set described in this standard is intended to enable a user or host to retrievethe amplifier module’s status and/or adjust its settings.This standard lists all of the commands currently defined and supported within the OACSframework. The commands described cover a wide range of applications, and not allcommands will be applicable to every amplifier. To determine the supported commands on anOACS compliant amplifier, please refer to the product specification supplied by themanufacturer.All OACS compliant amplifiers support the full set of “universal” OACS commands. Othercommands, usually specific to a design or implementation, may support some or all of the“optional” commands.