DIN 267-24-2007 紧固件.交货技术条件.第24部分:不带规定验证载荷值的螺母用硬度等级
百检网 2021-08-05
标准号:DIN 267-24-2007
中文标准名称:紧固件.交货技术条件.第24部分:不带规定验证载荷值的螺母用硬度等级
英文标准名称:Fasteners - Technical delivery conditions - Part 24: Hardness classes for nuts without specified proof load values
标准类型:J13
发布日期:1999/12/31 12:00:00
实施日期:1999/12/31 12:00:00
中国标准分类号:J13
国际标准分类号:21.060.20
引用标准:DIN 267-13;DIN EN 20898-2;DIN EN ISO 898-6;DIN EN ISO 2320;DIN EN ISO 3506-2;DIN EN ISO 6157-2;DIN EN ISO 6506-1;DIN EN ISO 6507-1;DIN EN ISO 18265
适用范围:This standard contains hardness classes for nuts which do not have to withstand specified proof loads. Thehardness classes specified have been classified according to minimum hardness values from which, however,no conclusions can be drawn with regard to the Ioadability of the nuts or their resistance to stripping. Thefunctional properties of nuts depend on their form.This standard does not apply to the following: nuts subjected to specified proof loads to DIN EN 20898-2 and DIN EN ISO 898-6; prevailing torque-type nuts to DIN EN ISO 2320; nuts with special requirements, such as weldability, corrosion resistance (see DIN EN ISO 3506-2), high- temperature strength (i.e. at temperatures over +300~C) or low-temperature toughness (i.e. at temperatures below-50 ~C (see DIN 267-13)).NOTE Nuts made of free-cutting steel shall not be used at temperatures over +250 ~C.
百检能给您带来哪些改变?
1、检测行业全覆盖,满足不同的检测;
2、实验室全覆盖,就近分配本地化检测;
3、工程师一对一服务,让检测更精准;
4、免费初检,初检不收取检测费用;
5、自助下单 快递免费上门取样;
6、周期短,费用低,服务周到;
7、拥有CMA、CNAS、CAL等权威资质;
8、检测报告权威有效、中国通用;