BS EN 14502-2-2005+A1-2008 起重机.载人提升设备.提升控制点

标准号：BS EN 14502-2-2005+A1-2008
中文标准名称：起重机.载人提升设备.提升控制点
英文标准名称：Cranes - Equipment for the lifting of persons - Part 2: Elevating control stations
标准类型：J80
发布日期：2005/12/12 12:00:00
实施日期：2005/12/12 12:00:00
中国标准分类号：J80
国际标准分类号：53.020.30
引用标准：EN 349-1993;EN 818-7;EN 953-1997;EN 982-1996;EN 12077-2-1999;EN 13411-3;EN 13411-4;EN 13411-6;EN 13557-2003;EN 13586-2004;EN 60204-32-1999;EN ISO 12100-1-2003;EN ISO 12100-2-2003
适用范围：This European Standard specifies additional requirements for the design of elevating control stations oncranes.General requirements for control stations on cranes are specified in EN 13557.This European Standard also specifies requirements for the driving mechanism, the supporting andsuspension system and for safety devices for the elevating control station.This European Standard does not cover hazards which could occur during transport, erection, commissioning,modification, maintenance, de-commissioning or disposal.This European Standard does not apply to control stations which will move with a load or a load liftingattachment.This European Standard does not apply to lifts for crane drivers.This European Standard does not deal with noise hazards because noise due to the movement of theelevating control station is negligible compared to the noise due to the normal operation of the crane.NOTE Noise hazards are dealt within the appropriate European Standard for specific crane types.The significant hazards covered by this European Standard are identified in Clause 4.This European Standard is not applicable to elevating control stations which are manufactured before the dateof publication by CEN.