ISO 16183-2002 重型机车.未处理排气的气体排放测量和瞬变试验条件下用部分流体稀释系统测量粒子排放

标准号：ISO 16183-2002
中文标准名称：重型机车.未处理排气的气体排放测量和瞬变试验条件下用部分流体稀释系统测量粒子排放
英文标准名称：Heavy-duty engines - Measurement of gaseous emissions from raw exhaust gas and of particulate emissions using partial flow dilution systems under transient test conditions
标准类型：S42
发布日期：1999/12/31 12:00:00
实施日期：1999/12/31 12:00:00
中国标准分类号：S42
国际标准分类号：13.040.50;43.060.20
适用范围：This International Standard specifies methods for the measurement and evaluation of gaseous and particulate exhaust emissions from heavy-duty engines under transient conditions on a test bed. The procedures it defines can be applied to any transient test cycle that does not require extreme system response times; it can therefore be used as an option to the regulated measurement equipment of certification test cycles — usually CVS-type systems — with the approval of the certification agency [among certification test cycles in place are the European transient cycle (ETC) and the US heavy-duty transient cycle (FTP)]. This International Standard is applicable to heavy-duty engines for commercial vehicles primarily designed for road use, but can also be applied to passenger car engines and to engines used for non-road applications. The test equipment specified in this International Standard can also be used in steady-state test cycles, however, if so, the calculation procedures will need to be replaced by those applicable to the particular test cycle.