ISO 15534-2-2000 机械安全工效学设计 第2部分:进入入孔开口所要求的尺寸测定原则

标准号：ISO 15534-2-2000
中文标准名称：机械安全工效学设计 第2部分:进入入孔开口所要求的尺寸测定原则
英文标准名称：Ergonomic design for the safety of machinery - Part 2: Principles for determining the dimensions required for access openings
标准类型：A25
发布日期：1999/12/31 12:00:00
实施日期：1999/12/31 12:00:00
中国标准分类号：A25
国际标准分类号：13.110;13.180
适用范围：This part of ISO 15534 specifies the dimensions of openings for access into machinery as defined in ISO/TR 12100-1. It provides the dimensions to which the values given in ISO 15534-3 are applicable. Values for additional space requirements are given in annex A. This part of ISO 15534 has been prepared primarily for non-mobile machinery; there may be additional specific requirements for mobile machinery. Dimensions for access openings are based on the values for the 95th percentile, whereas reach distances are based on the values for the 5th percentile, in each case the least favourable body dimension of the expected user population being used as a basis. The same considerations apply to the location of access openings. The anthropometric data given in ISO 15534-3 originate from static measurements of nude persons and do not take into account body movements, clothing, equipment, machinery-operating conditions or environmental conditions. This part of ISO 15534 shows how to combine the anthropometric data with suitable allowances to take these factors into account. Situations where people are to be prevented from reaching a hazard are dealt with in ISO 13852.