ISO 15500-1-2000 道路车辆 压缩天然气(CNG)燃料系统部件 第1部分:一般要求和定义

标准号：ISO 15500-1-2000
中文标准名称：道路车辆 压缩天然气(CNG)燃料系统部件 第1部分:一般要求和定义
英文标准名称：Road vehicles - Compressed natural gas (CNG) fuel system components - Part 1: General requirements and definitions
标准类型：T11
发布日期：1999/12/31 12:00:00
实施日期：1999/12/31 12:00:00
中国标准分类号：T11
国际标准分类号：43.060.40
适用范围：This part of ISO 15500 specifies general requirements and definitions of compressed natural gas fuel system components, intended for use on the types of motor vehicles as defined in ISO 3833. It also provides general design principles, and specifies requirements for instructions and marking. This part of ISO 15500 is applicable to vehicles using natural gas in accordance with ISO 15403 (mono-fuel, bi-fuel or dual-fuel applications). It is not applicable to the following: a) liquefied natural gas (LNG) fuel system components located upstream of, and including, the vaporizer; b) fuel containers; c) stationary gas engines; d) container mounting hardware; e) electronic fuel management; f) refuelling receptacles. NOTE 1 It is recognized that misceflaneous components not specifically covered herein can be examined to meet the criteria of this part of ISO 15500 and tested according to the appropriate functional tests NOTE 2 All references to pressure in this part of ISO 15500 are to be considered gauge pressures unless otherwise specified. NOTE 3 This part of ISO 15500 is based upon a service pressure for natural gas as fuel of 20 MPa (200 bar) settled at 15 ℃. Other service pressures can be accommodated by adjusting the pressure by the appropriate factor (ratio). For example, a 25 MPa (250 bar) service pressure system will require pressures to be multiplied by 1,25.