BS AU 50-4.5.1-1995 轮胎和车轮.第4部分:轮辋外廓和尺寸.第5节:工业用车轮辋.第1小节:代码制定系列轮胎用轮辋外廓和尺寸规范

标准号：BS AU 50-4.5.1-1995
中文标准名称：轮胎和车轮.第4部分:轮辋外廓和尺寸.第5节:工业用车轮辋.第1小节:代码制定系列轮胎用轮辋外廓和尺寸规范
英文标准名称：Tyres and wheels - Rim profiles and dimensions - Industrial vehicle rims - Specification for rim profiles and dimensions for code-designated series tyres
标准类型：T22
发布日期：1995/4/15 12:00:00
实施日期：1995/4/15 12:00:00
中国标准分类号：T22
国际标准分类号：43.040.50;43.080.01
适用范围：This Subsection of BS AU 50 : Part 4 specifies contours and dimensions of rims for use with code-designated series tyres used on industrial vehicles. Requirements for such tyres are specified in BS AU 50 : Part 1 : Subsection 5.1 : 1994. Requirements for rim construction and workmanship are specified in BS AU 50 : Part 2 : Section 0 : 1979. SAFETY NOTE. The wheel manufacturer should also be consulted to determine whether the rim and wheel is of sufficient strength for the intended service. In particular, care should be taken to ensure that the wheel will withstand the maximum pressure of any tyre that can be fitted in accordance with BS AU 50 : Part 1 : Subsection 5.1 : 1994. This pressure may exceed 1000 kPa (10 bar) for both diagonal and radial tyres.