塑料管及接头CE认证：PP塑料管及接头，PVC塑料管及接头
PP塑料管及塑料管接头CE认证符合建材CPR指令-Regulation 305/2011/EU on Construction Products Regulation
PP-R塑料管，PPR塑料管接头，以及PP-H，PP-B，PP-RCT管件及管接头的CE认证依据的标准如下：
•EN ISO 15874-1-2013;Plastics piping systems for hot and cold water installations-Polypropylene(PP)–Part 1:General塑料PP–基本要求
ISO 15874 2:2013,Plastics piping systems for hot and cold water installations—Polypropylene(PP)—Part 2:Pipes塑料PP–管件
ISO 15874 3,Plastics piping systems for hot and cold water installations—Polypropylene(PP)—Part 3:Fittings塑料PP–管接头
EN ISO 15874-5-2013Plastics piping systems for hot and cold water installations-Polypropylene(PP)–Part 5:Fitness for purpose of the system
塑料管及塑料管接头CE认证符合建材CPR指令-Regulation 305/2011/EU on Construction Products Regulation
冷热水安全管件及管接头的CE认证依据的标准如下：
•EN ISO 15874-1-2013;Plastics piping systems for hot and cold water installations-Polypropylene(PP)–Part 1:General塑料PP–基本要求
ISO 15874 2:2013,Plastics piping systems for hot and cold water installations—Polypropylene(PP)—Part 2:Pipes塑料PP–管件
ISO 15874 3,Plastics piping systems for hot and cold water installations—Polypropylene(PP)—Part 3:fittings塑料PP–管接头
EN ISO 15874-5-2013Plastics piping systems for hot and cold water installations-Polypropylene(PP)–Part 5:Fitness for purpose of the system
ISO 15875-1,Plastics piping systems for hot and cold water installations—Crosslinked polyethylene(PE-X)-Part 1:General塑料PE-X–基本要求
ISO 15875-2,Plastics piping systems for hot and cold water installations—Crosslinked polyethylene(PE-X)-Part 2:Pipes塑料PE-X–管件
ISO 15875-3,Plastics piping systems for hot and cold water installations—Crosslinked polyethylene(PE-X)-—Part 3:fittings塑料PE-X–管接头
ISO 15875-5,Plastics piping systems for hot and cold water installations—Crosslinked polyethylene(PE-X)–Part 5:Fitness for purpose of the system
ISO 15876-1,Plastics piping systems for hot and cold water installations—Polybutylene(PB)–Part 1:General塑料PB–基本要求
ISO 15876-2,Plastics piping systems for hot and cold water installations—Polybutylene(PB)–Part 2:Pipes塑料PB–管件
ISO 15876-3,Plastics piping systems for hot and cold water installations—Polybutylene(PB)—Part 3:fittings塑料PB–管接头
ISO 15876-5,Plastics piping systems for hot and cold water installations—Polybutylene(PB)–Part 5:Fitness for purpose of the system
ISO 15877-1,Plastics piping systems for hot and cold water installations—Chlorinated poly(vinyl chloride)(PVC-C)-Part 1:General PVC塑料基本要求
ISO 15877-2,Plastics piping systems for hot and cold water installations—Chlorinated poly(vinyl chloride)(PVC-C)-Part 2:Pipes PVC管
ISO 15877-3,Plastics piping systems for hot and cold water installations—Chlorinated poly(vinyl chloride)(PVC-C)-Part 3:fittings PVC管接头
ISO 15877-5,Plastics piping systems for hot and cold water installations—Chlorinated poly(vinyl chloride)(PVC-C)-Part 5:Fitness for purpose of the system
ISO 22391,Plastics piping systems for hot and cold water installations–Polyethylene of raised temperature resistance(PE-RT)
深圳百检网专业的建材产品CE认证服务，公告号机构授权代表，建材测试认证的经验为您提供****的高质量的测试评估和认证。CE认证同时我们还为您提供高质量的DOP文件编写和技术文件整理。塑料管测试样品：3个
完成塑料管或塑料管接头CE认证后可加贴CE标记，产品上加贴信息和CE标记如下
–Number of this International Standard符合的标准，比如EN ISO15874
–Manufacturer’s name and/or trade mark制造商名称
–Nominal outside diameter and nominal wall thickness外径尺寸和管件厚度
–Pipe dimension class管件尺寸等级，如A
–Material材料，如PPR
–Application class combined with operating pressure类别和压力，如class 1/10BAR
–Opacity能力
–Manufacturer’s information制造商信息
plastics piping systems
ISO 15874 consists of the following parts1)under the general title Plastics piping systems for hot and cold water
installations—Polypropylene(PP):
—Part 1:General
—Part 2:Pipes
—Part 3:Fittings
—Part 5:Fitness for purpose of the system
—Part 7:Guidance for the assessment of conformity[Technical specification]
ISO 15875,Plastics piping systems for hot and cold water installations—Crosslinked polyethylene(PE-X)
ISO 15876,Plastics piping systems for hot and cold water installations—Polybutylene(PB)
ISO 15877,Plastics piping systems for hot and cold water installations—Chlorinated poly(vinyl chloride)(PVC-C)
ISO 22391,Plastics piping systems for hot and cold water installations–Polyethylene of raised temperature
resistance(PE-RT)
ISO 15874?2:2013,Plastics piping systems for hot and cold water installations—Polypropylene(PP)—Part 2:Pipes
ISO 15874?3,Plastics piping systems for hot and cold water installations—Polypropylene(PP)—Part 3:Fittings
ISO 472,Plastics—Vocabulary
ISO 1043-1,Plastics—Symbols and abbreviated terms—Part 1:Basic polymers and their special characteristics
ISO 4065,Thermoplastics pipes—Universal wall thickness table
ISO 1133-1,Plastics—Determination of the melt mass-flow rate(MFR)and the melt volume-flow rate(MVR)
of thermoplastics—Part 1:Standard method
ISO 1167-1 Thermoplastics pipes,fittings and assemblies for the conveyance of fluids—Determination of the
resistance to internal pressure—Part 1:General method
ISO 1167-2 Thermoplastics pipes,fittings and assemblies for the conveyance of fluids—Determination of the
resistance to internal pressure—Part 2:Preparation of pipe test pieces
ISO 2505 Thermoplastics pipes—Longitudinal reversion—Test methods and parameters
ISO 3126 Plastics piping systems—Plastics components—Determination of dimensions
ISO 4065:1996,Thermoplastics pipes—Universal wall thickness table
ISO 7686 Plastics pipes and fittings—Determination of opacity
ISO 9080 Plastics piping and ducting systems—Determination of the long-term hydrostatic strength of
thermoplastics materials in pipe form by extrapolation
ISO 9854-1:1994 Thermoplastics pipes for the transport of fluids—Determination of pendulum impact strength
by the Charpy method—Part 1:General test method
ISO 9854-2:1994,Thermoplastics pipes for the transport of fluids—Determination of pendulum impact strength
by the Charpy method—Part 2:Test conditions for pipes of various materials
ISO 15874-1:2013,Plastics piping systems for hot and cold water installations—Polypropylene(PP)—
Part 1:General
ISO 15874-3,Plastics piping systems for hot and cold water installations—Polypropylene(PP)—Part 3:Fittings
ISO 15874-5,Plastics piping systems for hot and cold water installations—Polypropylene(PP)—Part 5:
Fitness for purpose of the system
