| 1 | Appearance of footwear
鞋类外观 | GB/T 3903.5 | No major defects |
| 2 | Flexing resistance of footwear
耐折性能
(not for infant) | GB/T 3903.1 (not for infant) | Length of slit: Max 30.0 mm, newly created slit: Max 5.0 mm, less than three places. No crazing, crack on vamp and tackless after flexing |
| 3 | Abrasion resistance of outsole
鞋底耐磨度
(not for infant) | GB/T 3903.2 (not for infant) | Max 15.0 mm |
| 4 | Peeling strength of footwear
剥离强度
(not for infant) | GB/T 3903.3 (not for infant) | Min 40 N/cm |
| 5 | Hardness of Heel / Sole
鞋跟/鞋底硬度
(not for infant) | GB/T 3903.4 (not for infant) | 45~60 shoreA |
| 6 | Sole bond (outsole and midsole) strength
外底与外中底粘合强度(not for infant) | GB/T 532 (not for infant) | Min 20 N/cm (Min 15 N/cm for microvoid sole tear but without tackless) |
| 7 | Shank hardness
勾心硬度(not for infant) | GB/T 230.1 (not for infant) | Comply with QB/T 1917 |
| 8 | Fibreboard flex cracking resistance
内底纤维板屈挠指数(not for infant) | QB/T 1472 (not for infant) | Min 1.9 |
| 9 | Cold flex resistance for upper material
鞋面材料低温屈挠(not for infant) | QB/T 2224 (not for infant) | The upper material shall be subjected to test without breaking or any cracks observed |
| 10 | Size marking
鞋号 | GB/T 3293.1 | The marking of size shall be included the length and width of foot, and the height of letter for marking shall be not less than 3 mm. |
| 11 | Labeling and packaging
标示及包装 | QB/T 2880 | Satisfactory |
| 12 | Colour fastness to crocking for Footwear
摩擦色牢度 (鞋类)(not for infant) | QB/T 2882 (not for infant) | Min 3 |
| 13 | Azo colourant contents in textile
可分解芳香胺染料 | GB/T 17592 | Forbidden (Max 5 mg/kg) |
| 14 | Formaldehyde
甲醛含量 | GB/T 2912.1 | Max 150 mg/kg For infant: Max 75 mg/kg |
| 15 | Formaldehyde in genuine leather
甲醛含量(真皮) | GB/T 19941 | For artificial leather: Max 150 mg/kg For infant: Max 75 mg/kg For genuine leather: Max 75 mg/kg For infant: Max 20 mg/kg |
| 16 | Cr (VI)
六价铬 | IUC-18 | Max 10mg/kg |
| 17 | Odour test for children leather shoes
异味 | QB/T 2880 section 6.2 | Max 2 |
