BS ISO 15705-2002 水质.化学需氧量的测定(ST-COD).小型密封管法

标准号：BS ISO 15705-2002
中文标准名称：水质.化学需氧量的测定(ST-COD).小型密封管法
英文标准名称：Water quality - Determination of the chemical oxygen demand index (ST-COD) - Small-scale sealed-tube method
标准类型：Z16
发布日期：2002/12/10 12:00:00
实施日期：2002/12/10 12:00:00
中国标准分类号：Z16
国际标准分类号：13.060.50
适用范围：This International Standard specifies a method for the determination of the chemical oxygen demand (ST-COD) using the sealed tube method. The test is empirical and is applicable to any aqueous sample, which includes all sewage and waste waters. The method is applicable to undiluted samples having ST-COD values up to 1 000 mg/l and a chloride concentration not exceeding 1 000 mg/l. Samples with higher ST-COD values require predilution. For samples with a low COD, the precision of the measurement will be reduced and the detection limit will be poorer. Samples with a high chloride concentration will need to be prediluted to give a chloride concentration of approximately 1 000 mg/l or less before analysis. The method oxidizes almost all types of organic compounds and most inorganic reducing agents. It has a detection limit (4,65 times the within-batch standard deviation of a blank or very low standard) of 6 mg/l for photometric detection at 600 nm, and 15 mg/l for titrimetric detection as reported by one laboratory comparing the photometric and titrimetric techniques using a commercial test kit with a range up to 1 000 mg/l. The titrimetric part of this International Standard is applicable to samples exhibiting an atypical colour or turbidity after the digestion stage. NOTE A comparison between the full-scale method (ISO 6060) and the method of this International Standard is given in annex A. A discussion of possible hazards is given in annex B. Information on commercial small-scale test kits is given in annex C. The method can be used over a reduced range (see annexes D and E). For checking the chloride concentration, see annex F.