BS EN ISO 10846-4-2003 声学和振动.弹性元件的振动-声传输特性的实验室测量.平动用除弹性支撑外的构件的动态劲度

标准号：BS EN ISO 10846-4-2003
中文标准名称：声学和振动.弹性元件的振动-声传输特性的实验室测量.平动用除弹性支撑外的构件的动态劲度
英文标准名称：Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Dynamic stiffness of elements other than resilient supports for translatory motion
标准类型：A59;J04
发布日期：2003/10/28 12:00:00
实施日期：2003/10/28 12:00:00
中国标准分类号：A59;J04
国际标准分类号：17.140.01
适用范围：ISO 10846-4:2003 specifies two methods for determining the dynamic transfer stiffness for translations of resilient elements other than resilient supports. Examples are resilient bellows, shaft couplings, power supply cables, hoses and pipe hangers. Elements filled with liquids, such as oil or water, are excluded.The methods are applicable to resilient elements with flat flanges or flat clamp interfaces. It is not necessary that the flanges be parallel.The direct method can be applied in the frequency range from 1 Hz up to a frequency that is usually determined by the frame resonance of the test arrangement (typically 300 Hz for test rigs with dimensions of the order of 1 m).The indirect method covers a frequency range that is determined by the test set-up and the isolator under test. The range is typically from a lower frequency between 20 Hz and 50 Hz to an upper frequency between 2 kHz and 5 kHz.The data obtained according to the methods specified in ISO 10846-4:2003 can be used for product information provided by manufacturers and suppliers, information during product development, quality control, and calculation of the transfer of vibration through resilient elements.