BS EN 13736-2003+A1-2009 机床安全,气动压力机

标准号：BS EN 13736-2003+A1-2009
中文标准名称：机床安全,气动压力机
英文标准名称：Safety of machine tools - Pneumatic presses
标准类型：J62
发布日期：2003/10/23 12:00:00
实施日期：2003/10/23 12:00:00
中国标准分类号：J62
国际标准分类号：25.120.10
引用标准：EN 953-1997;EN 954-1-1996;EN 982-1996;EN 983-1996;EN 999-1998;prEN 1005-2-1998;EN 1037;EN 1050-1996;EN 1070-1998;EN 1088-1995;EN 1127-1-1997;EN 1837-1999;EN ISO 4871-1996;EN ISO 11202-1995;EN 292-1-1991;EN 292-2-1991;EN 292-2/A1-1995;EN 294-1992;EN 349-19
适用范围：1.1 This European Standard specifies technical safety requirements and protective measures to be adopted bypersons undertaking the design as defined in 3.11 of EN 292-1:1991, manufacture and supply of pneumaticpresses the intended use of which is the cold working of metal or material partly of metal as defined in 3.1.13 andhereafter referred as machines.This standard also applies to machines which are integrated into an automatic production line where the hazardsand risk arising are comparable to those of machines working separately.1.2 This standard also covers pneumatic presses: whose primary intended use is the cold working of metal, which are to be used in the same way to work othersheet materials (e.g. cardboard, plastic, rubber, leather) and metal powder; with an intermediate pneumatic/hydraulic intensifier.1.3 The requirements in this standard take account of intended use, as defined in 3.12 of EN 292-1:1991. Thisstandard presumes access to the press from all directions, deals with the hazards described in clause 4, andspecifies the safety measures for both the operator and other exposed persons.1.4 This standard also applies to ancillary devices which are an integral part of the press. This standard alsoapplies to machines which are integrated into an automatic production line where the hazards and risk arising arecomparable to those of machines working separately.1.5 This standard does not cover machines whose principal designed purpose is:a) sheet metal cutting by guillotine;b) bending or folding by pneumatic press brakes or folding machines;c) spot welding;d) tube bending;e) straightening;f) drop stamping;g) working by pneumatic hammer;h) compaction of metal powder.Special pneumatic machines for assemblying or calibrating are not covered but this standard may be used as abasis for there machines.1.6 This standard does not cover the safety requirements related to the use of PES or PPS. They will be dealtwith at its next revision.1.7 This standard is not applicable to machines which are manufactured before the date of publication of thisdocument by CEN.