BS ISO 16063-21-2003 振动和冲击传感器的校准方法.与基准传感器比对进行振动校准

标准号：BS ISO 16063-21-2003
中文标准名称：振动和冲击传感器的校准方法.与基准传感器比对进行振动校准
英文标准名称：Methods for the calibration of vibration and shock transducers - Vibration calibration by comparison to a reference transducer
标准类型：L15
发布日期：2003/9/2 12:00:00
实施日期：2003/9/2 12:00:00
中国标准分类号：L15
国际标准分类号：17.160
适用范围：This part of ISO 16063 describes the calibration of rectilinear vibration transducers by comparison. Although it mainly describes calibration using direct comparison to a standard calibrated by primary methods, the methods described can be applied between other levels in the calibration hierarchy. This part of ISO 16063 specifies procedures for performing calibrations of rectilinear vibration transducers by comparison in the frequency range from 0,4 Hz to 10 kHz. It is primarily intended for those who are required to meet ISO standardized methods for the measurement of vibration under laboratory conditions, where the uncertainty of measurement is relatively small. It can also be used under field conditions, where the uncertainty of measurement may be relatively large. From knowledge of all significant sources of uncertainty affecting the calibration, the expanded uncertainty can be evaluated using the methods given in this part of ISO 16063. It also covers the assessment of uncertainties for calibrations performed using a check standard. Comparison calibrations made in accordance with this part of ISO 16063 need to allow for the environmental conditions of the reference transducer calibration. NOTE Transducer calibrations made under extreme environmental conditions are covered by other International Standards.