BS ISO 1984-2-2001 固定高度工作台的手工控制铣床的试验条件.精度试验.带有垂直主轴的机器

百检网 2021-07-14
标准号:BS ISO 1984-2-2001
中文标准名称:固定高度工作台的手工控制铣床的试验条件.精度试验.带有垂直主轴的机器
英文标准名称:Test conditions for manually controlled milling machines with table of fixed height - Testing of the accuracy - Machines with vertical spindle
标准类型:J54
发布日期:2001/8/15 12:00:00
实施日期:2001/8/15 12:00:00
中国标准分类号:J54
国际标准分类号:25.080.20
适用范围:This part of ISO 1984 specifies, with reference to ISO 230-1, both geometric and machining tests on general purpose and normal-accuracy milling machines with table of fixed height and with a vertical spindle. It also specifies the applicable tolerances corresponding to the above-mentioned tests. This part of ISO 1984 deals only with the verification of the geometric accuracy of the machine. It does not apply to the testing of the machine operation (vibrations, abnormal noises, stick-slip motion of components, etc.), nor to checking of its characteristics (speeds, feeds, etc.), which should generally be checked before testing the accuracy. This part of ISO 1984 defines the terminology used for the principal elements of the machine and indicates the designation of axes in accordance with ISO 841[1]. NOTE Numerically controlled milling machines are covered by ISO 10791-2[2].

百检能给您带来哪些改变?

1、检测行业全覆盖,满足不同的检测;

2、实验室全覆盖,就近分配本地化检测;

3、工程师一对一服务,让检测更精准;

4、免费初检,初检不收取检测费用;

5、自助下单 快递免费上门取样;

6、周期短,费用低,服务周到;

7、拥有CMA、CNAS、CAL等权威资质;

8、检测报告权威有效、中国通用;

客户案例展示

  • 上海朗波王服饰有限公司
  • 浙江圣达生物药业股份有限公司
  • 天津市长庆电子科技有限公司
  • 上海纽特丝纺织品有限公司
  • 无锡露米娅纺织有限公司
  • 东方电气风电(凉山)有限公司